![]() |
Originally Posted by talkstometal
(Post 9577797)
1) thewird - CF : Twill Weave
2) PortedRotorTuner - CF: 3) eightsixlife - CF: 4) calicos - CF: Twill Weave 5) CrispyRX7 - CF: Plain Weave 6) *RX007* - CF: 7) 510_rx7 - CF : Twill Weave 8) FyVe - CF: 9) MrsJoff - CF: Twill Weave 100% in, will send payment when needed. 10) MazdaGuy42 - CF: Plain Weave 11) Dusted RX - CF: Plain Weave 12) Coolant_Leak - CF: Plain Weave 13) JEROME- Twill Weave 14) theRJpackage: Twill Weave 15) imtiaz : CF- twill weave 16) MisterPiranha: CF - plain weave 17) talkstometal: CF - plain weave 18) 93vrfd houston: CF - twill weave 19) 7tuned: CF- plain weave 20) Et3rNaL: CF - plain weave |
Something in a big box is apparently on it's way to me. :D
Don't loose hope guys.... Crispy |
so are we making payment yet?
|
You have to wait for "THE CALL." Ken will call you when yours is ready.
Crispy |
hey crispy, congrats on picking up your diffuser! ken send me an email when your ready for my payment. i won't be answering the houston line.
thanx, mark |
BTW, My big box arrived last week. It was worth the wait.
Crispy |
Originally Posted by CrispyRX7
(Post 9655096)
BTW, My big box arrived last week. It was worth the wait.
Crispy When is the installation writeup? :) I'm looking forward to seeing how you installed it. Be careful with the muffler side. Its very flexy and easy to crack if unsupported. |
Originally Posted by gracer7-rx7
(Post 9655107)
When is the installation writeup? :)
I'm looking forward to seeing how you installed it. Be careful with the muffler side. Its very flexy and easy to crack if unsupported. I've actually written the install page already (other CF parts have already been done) I just need to add the details of how the actual install goes. I WILL be removing the exhaust for the isntall and I also plan on keeping the rear mudguards. And thanks for the heads up about being "flexy." I've taken some pics already and as light as it is it is also quite strong...much to my pleasure. Regards, Crispy |
Originally Posted by CrispyRX7
(Post 9655717)
LOL probably not for a while...OH the IRONY! I've got a full plate.
I've actually written the install page already (other CF parts have already been done) I just need to add the details of how the actual install goes. I WILL be removing the exhaust for the isntall and I also plan on keeping the rear mudguards. And thanks for the heads up about being "flexy." I've taken some pics already and as light as it is it is also quite strong...much to my pleasure. Regards, Crispy I'm not sure you want to remove the exhaust. Once the diffuser is on, its tricky to mount that rear muffler bracket. I removed the rear muffler the first time and subsequent times left it on. I find it simpler to leave it on. Once the car is up on jack stands, leave the diffuser on the cardboard and balance it on the jack to raise it up. You'll want to use something to hold up the passenger side beside the muffler - I think I used some bricks. Hand tighten the rear of the diffuser first - behind the gas tank. Next hand tighten the front along the rear bumper. Then try and tighten above the muffler tips. That part is a biatch but can be done using some ratcheting wrenches and 90* screwdrivers. Once everything is hand tight and the muffler area is on, the last tricky part is the driver's side rear corner. At least it was on mine from a couple of years ago. You need to first fully tighten the rear of it near the bumper lip then fully tighen the section that wraps around the wheel well. If you are using the stock mud flaps, you can use it to cover most of the ill fitting gap in that area. Or something like that. It was 2 years last time I took it apart. |
got mine a while back from shine but heres a couple pics.
http://i719.photobucket.com/albums/w...Picture017.jpg http://i719.photobucket.com/albums/w...7/IMG_0248.jpg |
Originally Posted by gracer7-rx7
(Post 9655886)
I'm not sure you want to remove the exhaust. Once the diffuser is on, its tricky to mount that rear muffler bracket. I removed the rear muffler the first time and subsequent times left it on. I find it simpler to leave it on.
Once the car is up on jack stands, leave the diffuser on the cardboard and balance it on the jack to raise it up. You'll want to use something to hold up the passenger side beside the muffler - I think I used some bricks. Hand tighten the rear of the diffuser first - behind the gas tank. Next hand tighten the front along the rear bumper. Then try and tighten above the muffler tips. That part is a biatch but can be done using some ratcheting wrenches and 90* screwdrivers. Once everything is hand tight and the muffler area is on, the last tricky part is the driver's side rear corner. At least it was on mine from a couple of years ago. You need to first fully tighten the rear of it near the bumper lip then fully tighen the section that wraps around the wheel well. If you are using the stock mud flaps, you can use it to cover most of the ill fitting gap in that area. Or something like that. It was 2 years last time I took it apart. Regards, Crispy |
) thewird - CF : Twill Weave
2) PortedRotorTuner - CF: 3) eightsixlife - CF: 4) calicos - CF: Twill Weave 5) CrispyRX7 - CF: Plain Weave 6) *RX007* - CF: 7) 510_rx7 - CF : Twill Weave 8) FyVe - CF: 9) MrsJoff - CF: Twill Weave 100% in, will send payment when needed. 10) MazdaGuy42 - CF: Plain Weave 11) Dusted RX - CF: Plain Weave 12) Coolant_Leak - CF: Plain Weave 13) JEROME- Twill Weave 14) theRJpackage: Twill Weave 15) imtiaz : CF- twill weave 16) MisterPiranha: CF - plain weave 17) talkstometal: CF - plain weave 18) 93vrfd houston: CF - twill weave 19) 7tuned: CF- plain weave 20) Et3rNaL: CF - plain weave 210FORTUNEBV: CF PLAIN WEAVE.... When are these shipping btw? |
Mine was shipped and received two weeks ago.
I'm number 5 on the list. Ken can make about 2 per week from what he tells me. FWIW Crispy |
what was the shipped price?
|
1) thewird - CF : Twill Weave
2) PortedRotorTuner - CF: 3) eightsixlife - CF: 4) calicos - CF: Twill Weave 5) CrispyRX7 - CF: Plain Weave 6) *RX007* - CF: 7) 510_rx7 - CF : Twill Weave 8) FyVe - CF: 9) MrsJoff - CF: Twill Weave 100% in, will send payment when needed. 10) MazdaGuy42 - CF: Plain Weave 11) Dusted RX - CF: Plain Weave 12) Coolant_Leak - CF: Plain Weave 13) JEROME- Twill Weave 14) theRJpackage: Twill Weave 15) imtiaz : CF- twill weave 16) MisterPiranha: CF - plain weave 17) talkstometal: CF - plain weave 18) 93vrfd houston: CF - twill weave 19) 7tuned: CF- plain weave 20) Et3rNaL: CF - plain weave 21)Rotary-x CF twill weave 21)FORTUNEBV: CF PLAIN WEAVE 22)Rotar Art: CF- plain weave |
where can i get one of these rear diffusers!!! someone please help i tried contacting shine auto no answer back !!!!
|
Originally Posted by eightsixlife
(Post 9267398)
not a great pic, but herblenny's car was a great example of this as i think he was definitely one of the first ones to start the idea... :icon_tup:
https://www.rx7club.com/attachment.p...d=199148&stc=1 |
hey ken, any updates on where abouts you are on the list?
|
The list is too confusing ). Just contact me... these are in full production.
Ken |
hey ken you have pm..................
|
Got mine. The bubble wrapping for the shipping is just amazing. It took me over 5 minutes just to unwrap it.
http://i660.photobucket.com/albums/u...build002-2.jpg http://i660.photobucket.com/albums/u...build003-1.jpg Don't mind the posers. The camera comes out and they assume it is for them. Thanks Ken |
Does this badboy install onto factory RX7's?
Mines a '92 JDM RX7, and goddamn am I ever impressed with the look of these!!! No drilling? |
Originally Posted by Deals Gap Rotary Rally
(Post 9710833)
I'm getting Ken's CF mudguard and will see how it works with the CF Street.
|
|
Originally Posted by Lakusta
(Post 9793965)
Does this badboy install onto factory RX7's?
Mines a '92 JDM RX7, and goddamn am I ever impressed with the look of these!!! No drilling? Look at Crispy's install pics. Mine was pretty much the same with the same issues in fitment. Minor stuff really, especially if you don't intend to be a "show" car. Overall I wish I had purchased the CF version. |
All times are GMT -5. The time now is 02:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands