RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   ShineAutoProject (https://www.rx7club.com/shineautoproject-161/)
-   -   FD3S: OEM sideskirts replica (https://www.rx7club.com/shineautoproject-161/fd3s-oem-sideskirts-replica-528927/)

GoodfellaFD3S 05-17-06 07:27 AM


Originally Posted by RX7_Fanatic
if mazda designed them in two pieces, it was for a reason.

Just like mazda designed the plastic AST and pre-cat for a reason :D?

I am interested, and don't plan on removing my front fenders anytime soon. One piece would look cleaner in my opinion :).

Fred Villamor 05-17-06 11:06 AM

As long as they fit properly and mount to the OEM screw holes , I'm interested ... 1 piece or 2 piece is OK ...

RX7_Fanatic 05-17-06 09:22 PM


Originally Posted by GoodfellaFD3S
Just like mazda designed the plastic AST and pre-cat for a reason :D?

I am interested, and don't plan on removing my front fenders anytime soon. One piece would look cleaner in my opinion :).

ya cuz USA sux for teh pre-cat...the AST...I dunno, probably cuz they thought they were being inovative using plastic lol.

but the sides were in japan too yes?

its an aero part, not a mechanical part, probably not even designed by the same group of people...the engine tards, yeah they need to be slapped, but the aero in my opinion is A+ for a 1993

Jimmynguyen 05-18-06 12:00 PM

how about rear skirt?

RX7 RAGE 05-18-06 12:34 PM


Originally Posted by Jimmynguyen
how about rear skirt?

There is no JDM rear skirt. There is a mud guard though and those are relatively cheap.

swilson@assetworks.com 05-18-06 01:01 PM

IMHO - I think these will look good with the RE diffuser on the back.

ranchan02 05-18-06 01:11 PM

Hey Everyone:

Is this GB still going on?

X-Ped 05-18-06 02:30 PM

Add on if you want in.

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)

n87 05-18-06 07:44 PM

1 Piece Looks So Much Cleaner. Forealz

Fred Villamor 05-19-06 08:23 AM

Soooooooooooo , is this on ??? and how much $$$ ??

the FUN 05-19-06 09:38 AM

Sideskirt.
 
Add on if you want in.

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)

Heisenberg 05-20-06 02:50 PM

Add on if you want in.

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)

RX7_Fanatic 05-25-06 01:39 AM

any more word on ETA on when these will be up for purchase or final costs?

no rush here, I know you guys make A+ quality stuff, just need to have a timeslot as to when i should have money ready for it.

X-Ped 05-26-06 02:26 PM

Any updates?

TRISPEEDFD3S 05-28-06 08:41 PM

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)
14.TRISPEEDFD3S (Interested)

swilson@assetworks.com 06-08-06 03:50 PM

Bump
Is this product project still alive?

shineautoproject 06-08-06 04:20 PM

yes indeed

shineautoproject 06-08-06 04:21 PM

we got them in and we're working on it.

hotfd3s 06-08-06 11:40 PM

I maybe interested. Will this be a 1 or 2 piece?

X-Ped 06-08-06 11:55 PM

Will you guys have the skirts ready before july? Reason is my car is in the bodyshop and want to get it painted and installed while its there.

Lastly any idea on gb price?

tonyhawk76 06-11-06 11:22 AM

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)
14.TRISPEEDFD3S (Interested)
15. tonyhawk76 (interested)

Silver Stone TT 06-12-06 09:58 AM

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)
14.TRISPEEDFD3S (Interested)
15. tonyhawk76 (interested)
16.Silver Stone TT (interested)

imagin3 06-13-06 04:48 AM

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)
14.TRISPEEDFD3S (Interested)
15. tonyhawk76 (interested)
16.Silver Stone TT (interested)
17.Imagin3 (very interested)

RX7_Fanatic 06-15-06 03:10 PM

bump for teh info on the skirts yo! 1-piece/2-piece? thx guys...I'll probably drive up there again if thats alright with you guys to pickem up.

1revn3rdgen 06-21-06 08:56 PM

When can i send the money?

shineautoproject 06-21-06 09:03 PM

anytime............ :) shineautoproject@gmail.com

1revn3rdgen 06-21-06 09:07 PM

What time can i call you?

shineautoproject 06-21-06 09:17 PM

11-12 am/pm would be perfect. :) 909 773 0820

1revn3rdgen 06-21-06 09:28 PM

So tomorrow morning right?

shineautoproject 06-21-06 09:30 PM

yep.......... we get in at 10:30 am

Noxlupus 06-22-06 07:44 AM

So, is this a one or two piece skirt?

shineautoproject 06-22-06 08:04 AM

2 piece .........

Does anyone know if the bottom of the skirts boltup to anything?

hydrosport 06-25-06 04:20 PM

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)
14.TRISPEEDFD3S (Interested)
15. tonyhawk76 (interested)
16.Silver Stone TT (interested)
17.Imagin3 (very interested
18.hydrosport

shineautoproject 06-26-06 01:06 PM

These sideskirts are actually very tricky to replicate. It has to be supportedd well. The original ones feel like a big fish.

p l a y j a y 06-30-06 12:34 AM


Originally Posted by p l a y j a y
I'm interested on getting a set (for my other future FD) but curious how are these going to be molded. I think Rotary Extreme considered making replicas but hesistated because of making the mold and did the Apexi sideskirts instead.

I wish I had pictures of it uninstalled showing the thickness of the rubber-like material.

That was my question on post #35

sherman2k 07-06-06 01:24 PM

What is the status of this GB?

Sharmack 07-10-06 05:55 PM

Talked to Ken today and I am 100% in as soon as they are ready.

-Chris

Noxlupus 07-12-06 08:40 AM

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)
14.TRISPEEDFD3S (Interested)
15. tonyhawk76 (interested)
16.Silver Stone TT (interested)
17.Imagin3 (very interested
18.hydrosport
19. Noxlupus (very interested)

Sharmack 07-12-06 08:01 PM

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)
14.TRISPEEDFD3S (Interested)
15. tonyhawk76 (interested)
16.Silver Stone TT (interested)
17.Imagin3 (very interested
18.hydrosport
19. Noxlupus (very interested)
20. Sharmack (sure thing)

Silver_FD 07-12-06 08:29 PM

I'm in as long as shipping to Canada isn't to much. Edmonton Canada T6X1C1

1. x-ped
2. TireSmokin7
3. njstreetrx7
4. Steve Wilson
5. n87
6. RX7_Fanatic
7. playjay (interested)
8. dtm le mans (interested)
9. sherman2k
10.ihavetwins (interested)
11.GoodfellaFD3S (interested)
12 the FUN (interested)
13.BackyardSog (interested)
14.TRISPEEDFD3S (Interested)
15. tonyhawk76 (interested)
16.Silver Stone TT (interested)
17.Imagin3 (very interested
18.hydrosport
19. Noxlupus (very interested)
20. Sharmack (sure thing)
21. Silver_FD (depending on shipping costs)

X-Ped 07-13-06 09:34 PM

Count me out, the body shop is done with my car...

1.TireSmokin7
2.njstreetrx7
3.Steve Wilson
4 n87
5.RX7_Fanatic
6.playjay (interested)
7.dtm le mans (interested)
8.sherman2k
9.ihavetwins (interested)
10.GoodfellaFD3S (interested)
11.the FUN (interested)
12.BackyardSog (interested)
13.TRISPEEDFD3S (Interested)
14.tonyhawk76 (interested)
15.Silver Stone TT (interested)
16.Imagin3 (very interested
17.hydrosport
18.Noxlupus (very interested)
19.Sharmack (sure thing)
20.Silver_FD (depending on shipping costs)

shineautoproject 07-15-06 05:38 PM

patience guys. Almost done. We had trouble prepping up the ORIGINAL part. We have to do improvements to the mold which takes a long time.

I would like to post a quote from an interested buyer regarding the OEM sideskirts.

"I saw recently on a post on the rx7 forum that you will be duplicating the Mazda OEM Sideskirts for the FD3S. Anyhow, to make a long story short if they were being duplicated in Fiberglass that would be the best news I have heard all year. I have an original set that I purchased awhile back but the material that the original ones are made out of is heavy and not really very paint friendly. (I have found a lot cracks and stuff in the paint because of how pliable that rubbery material is). " - Chris Sharman


Here's another one.


"I was on the RX7club.com and noticed that you are currently working on a set of OEM replica side skirts for the FD… (made from the same foam type material) … I have a question that I hope you maybe able to shed some light on… I have a set of OEM skirts and the foam started to crack…these cracks are located right where the sideskirts start turn up (near the rear of the door)…Do you know of any way to fix this problem??? Is there some type of glue or epoxy I might be able to use??? The car is currently at the bodyshop and will be painted early next week… thanks." -Kevin

RX7_Fanatic 07-16-06 05:59 PM

ken, when will you need payment for these...or should i have already sent it...and can i come pick them up like i did the diffuser?

also refresh me on the price, i havent been on in a long time, and i'm at work right now cant scroll thru all the mess...thx ken!

TeamChin 07-17-06 07:30 AM

1.TireSmokin7
2.njstreetrx7
3.Steve Wilson
4 n87
5.RX7_Fanatic
6.playjay (interested)
7.dtm le mans (interested)
8.sherman2k
9.ihavetwins (interested)
10.GoodfellaFD3S (interested)
11.the FUN (interested)
12.BackyardSog (interested)
13.TRISPEEDFD3S (Interested)
14.tonyhawk76 (interested)
15.Silver Stone TT (interested)
16.Imagin3 (very interested
17.hydrosport
18.Noxlupus (very interested)
19.Sharmack (sure thing)
20.Silver_FD (depending on shipping costs)
21.TeamChin

shineautoproject 07-17-06 01:35 PM

$275 + shipping ($60)

Silver_FD 07-17-06 06:03 PM

Sorry guys, I went with the Sanai sideskirts instead.


1.TireSmokin7
2.njstreetrx7
3.Steve Wilson
4 n87
5.RX7_Fanatic
6.playjay (interested)
7.dtm le mans (interested)
8.sherman2k
9.ihavetwins (interested)
10.GoodfellaFD3S (interested)
11.the FUN (interested)
12.BackyardSog (interested)
13.TRISPEEDFD3S (Interested)
14.tonyhawk76 (interested)
15.Silver Stone TT (interested)
16.Imagin3 (very interested
17.hydrosport
18.Noxlupus (very interested)
19.Sharmack (sure thing)
20.TeamChin

TireSmokin7 07-17-06 06:29 PM

I'd like to see a image of the prototypes please. I don't even know if you are building one or two piece. Can locals pickup and pay cash? You guys are too close to consider shipping these. I can swing by and pick them up this week if that's OK?

shineautoproject 07-17-06 06:31 PM


Originally Posted by TireSmokin7
I'd like to see a image of the prototypes please. I don't even know if you are building one or two piece. Can locals pickup and pay cash? You guys are too close to consider shipping these. I can swing by and pick them up this week if that's OK?

we're not done with them yet.

7_rocket 07-18-06 05:51 PM

Im intrested!
 
1.TireSmokin7
2.njstreetrx7
3.Steve Wilson
4 n87
5.RX7_Fanatic
6.playjay (interested)
7.dtm le mans (interested)
8.sherman2k
9.ihavetwins (interested)
10.GoodfellaFD3S (interested)
11.the FUN (interested)
12.BackyardSog (interested)
13.TRISPEEDFD3S (Interested)
14.tonyhawk76 (interested)
15.Silver Stone TT (interested)
16.Imagin3 (very interested
17.hydrosport
18.Noxlupus (very interested)
19.Sharmack (sure thing)
20.TeamChin
21.7_rocket



likeadrug 07-18-06 11:01 PM

1.TireSmokin7
2.njstreetrx7
3.Steve Wilson
4 n87
5.RX7_Fanatic
6.playjay (interested)
7.dtm le mans (interested)
8.sherman2k
9.ihavetwins (interested)
10.GoodfellaFD3S (interested)
11.the FUN (interested)
12.BackyardSog (interested)
13.TRISPEEDFD3S (Interested)
14.tonyhawk76 (interested)
15.Silver Stone TT (interested)
16.Imagin3 (very interested
17.hydrosport
18.Noxlupus (very interested)
19.Sharmack (sure thing)
20.TeamChin
21.7_rocket
22. likeadrug (depending on shipping to canada!)


All times are GMT -5. The time now is 04:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands