RX7Club.com - Mazda RX7 Forum - Search Results

 
Search: Posts Made By: Nosferatu
Showing results 1 to 25 of 217
Search took 0.56 seconds.
04-06-18, 10:26 AM
Replies: 4
Views: 356
Posted By Nosferatu

they have a note on the trailing links...

they have a note on the trailing links description about clearancing may be required with their solid bushings.
03-30-18, 01:00 PM
Replies: 12
Views: 542
Posted By Nosferatu

lense housing for the jdm front parking bubble...

lense housing for the jdm front parking bubble lamp would be greatly appreciated.
03-30-18, 12:48 PM
Replies: 16
Views: 491
Posted By Nosferatu

hope you have a spare gauge if you try pulling...

hope you have a spare gauge if you try pulling the needle off...unlike other oem gauges these are very hard to get off without breaking...found out the hard way.
03-10-18, 03:11 PM
Replies: 24
Views: 1,031
Posted By Nosferatu

To do it right you have to also fill weld the...

To do it right you have to also fill weld the inner ports on the FD upper manifold on one side about an 1 inch or so up into the port, then port match to the FC gasket.... otherwise the port doesn't...
02-28-18, 12:07 PM
Replies: 6
Views: 509
Posted By Nosferatu

Do you have personal experience with this clutch?...

Do you have personal experience with this clutch? like you actually used it in a FC3S?....price is attractive.
02-10-18, 10:17 AM
Replies: 9
Views: 429
Posted By Nosferatu

maybe things have changed but I was told the flex...

maybe things have changed but I was told the flex agent they add is only beneficial till the paint cures ...i.e. doesn't do anything for paint flexibility otherwise. need to sand them out obviously...
11-27-17, 10:34 PM
Replies: 13
Views: 1,637
Posted By Nosferatu

I would guess so since it injects close to the...

I would guess so since it injects close to the port opening making the port wall fuel pooling less of a factor.
11-27-17, 04:28 PM
Replies: 40
Views: 3,825
Posted By Nosferatu

That fjo/holley pwm solenoid looks just like a...

That fjo/holley pwm solenoid looks just like a industrial stainless steel honeywell solenoid i have with 1/8" npt ports.
11-16-17, 11:58 AM
Replies: 12
Views: 716
Posted By Nosferatu

Enkei offers the "RPF1" in a 17x8.5+30 in silver...

Enkei offers the "RPF1" in a 17x8.5+30 in silver ...that is a nice light wheel that would fit your requirments...i.e. fit stock like suspension and not have roll with a 225/40R17 tire in the front...
11-13-17, 02:57 PM
Replies: 12
Views: 716
Posted By Nosferatu

BS .... like to see you run a 17x9+40 on the...

BS .... like to see you run a 17x9+40 on the front of a FC without a spacer.
Forum: Build Threads
11-12-17, 06:18 PM
Replies: 41
Views: 3,990
Posted By Nosferatu

Which panels are you replacing? rear quarters?...

Which panels are you replacing? rear quarters? when I inquired...mazda said they still had some in japan but weren't sending any more over.
10-23-17, 02:50 PM
Replies: 15
Views: 788
Posted By Nosferatu

Are you referring to the exedy stage 1 turbo...

Are you referring to the exedy stage 1 turbo clutch? how does stage 1 compare to the stage 1 heavy duty(exedy claims 25% stronger) in pedal feel...is that still lighter then the act HD pressure...
10-20-17, 11:17 AM
10-20-17, 11:12 AM
Replies: 22
Views: 915
Posted By Nosferatu

haltech's have ecus that can drive the elec. OMP...

haltech's have ecus that can drive the elec. OMP but won't have the failure check feature the stock ecu offers...that turbo spec. means nothing other then it's the frame size family of the compressor...
10-12-17, 10:42 AM
Replies: 6
Views: 452
Posted By Nosferatu

Jspec have the fuel system backwards to USDM...

Jspec have the fuel system backwards to USDM motors ...i.e. feed is to the secondary rail and fpr is on the primary..i'd double check the fuel rails to confirm.
10-04-17, 07:34 PM
Replies: 12
Views: 596
Posted By Nosferatu

this stuff on a shield with an air gap would be...

this stuff on a shield with an air gap would be closer to ideal..compared to taping the actual lower intake i'm guessing.
10-03-17, 11:58 AM
Replies: 10
Views: 501
Posted By Nosferatu

FB01-28-470A ....I'm staring at my old one and...

FB01-28-470A ....I'm staring at my old one and new ...they are the same...unless I picked up one of the last ones they had I'd get another parts guy looking.
10-02-17, 08:00 PM
Replies: 10
Views: 501
Posted By Nosferatu

if you actually need that washer also but have a...

if you actually need that washer also but have a trashed bolt with a good cam...you can separate the cam off the bolt and use it on the new bolt as the washer cam..it's only pressed on.
10-02-17, 07:52 PM
Replies: 10
Views: 501
Posted By Nosferatu

the cam bolt is available...I just bought one a...

the cam bolt is available...I just bought one a month ago..what was NLA is the second washer cam.
09-23-17, 12:50 PM
Replies: 3
Views: 432
Posted By Nosferatu

same ....the cable mechanism for the door vents...

same ....the cable mechanism for the door vents is not on the convertible dash swap it off the coupe if you need it. apparently the dash ends are a bit different from s4 to s5...use the corresponding...
09-19-17, 12:22 PM
Replies: 4
Views: 436
Posted By Nosferatu

just like spokanerxdude wrote..some don't have...

just like spokanerxdude wrote..some don't have the click...turn them back per spec plus a turn or two and go from there.
08-24-17, 12:48 PM
Replies: 13
Views: 971
Posted By Nosferatu

GF210's will give you less inside clearance then...

GF210's will give you less inside clearance then the stock springs ...they are wound wider then stock at the tire level
07-12-17, 11:42 AM
Replies: 13
Views: 995
Posted By Nosferatu

HK$ 50mm had straight through packed...

HK$ 50mm had straight through packed mufflers..dyno max was a chambered muffler of 3 inner tubes without packing.
07-01-17, 12:14 PM
Replies: 9
Views: 551
Posted By Nosferatu

that thing is a pos....nothing they ever made had...

that thing is a pos....nothing they ever made had any engineering thought in it.
06-30-17, 11:43 AM
Replies: 11
Views: 633
Posted By Nosferatu

just doing the same...cheers I haven't measured...

just doing the same...cheers
I haven't measured the front studs..so i'm not sure if they are longer then the rears...someone may chime in if you need the 3.25" studs for the front for a 20mm spacer....
Showing results 1 to 25 of 217
 


 
Forum Jump

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.