RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   SE RX-7 Forum (https://www.rx7club.com/se-rx-7-forum-35/)
-   -   North Carolina Meet - March 18th (https://www.rx7club.com/se-rx-7-forum-35/north-carolina-meet-march-18th-510138/)

trickfc 02-25-06 03:29 PM

I'm in. My TII is back on the road as of thrusday.

Mike

GTUser 02-26-06 12:36 PM


Originally Posted by quicksilver_rx7
Updated list:

Looks like a few guys are coming down from the RRDI, we know Smoken' as Steve 'cause that's what his tires do. He is going to school somewhere around Statesville on an RRDI scholarship so that he can come back to the RTP area and keep all our rotaries running. Looks like we'll have 5-6 drivers coming to Charlotte that weekend. Keith has a beautiful vert and I haven't seen his new wheels or his new ragtop.

robs_seven 02-26-06 01:53 PM

man it looks like its going to be a good turn out down here, i cant wait to see all the cars down there, its going to be my first meet so its going to be fun. cant wait, and has any one decided where were going to go eat?? any ideas around the area. some where not to expensive but where we can get a large party table. and if we get it all figured out maybe we can make resevatoins some where so its not a huge suprise when we all show up.

84gsNC 02-27-06 10:47 PM


Originally Posted by NCMontegott
sorry to hear that.
any plans to rebuild?

Adam G

Nope, my entire 12a turbo setup is up for grabs if anyone here locally wants it, would defineatly help by not having to ship, plus you could see it on my car before I take it off. Picking up a GSL-SE this weekend which will recieve a J-spec 13bt swap w/ a 60-1 hopefully by april or may.

Suppose I could still drive it up there on 1 rotor, still starts w/ a flick of the key ;)

lt1_rx7 02-28-06 12:31 AM

hey, i'm in asheville NC...i would love to come, but i dont know how to get there!!! please help! anyone able to give me directions? thanx...feel free to email me at traynham.houston@gmail.com

robs_seven 02-28-06 05:33 AM

directions
 

hey, i'm in asheville NC...i would love to come, but i dont know how to get there!!! please help! anyone able to give me directions? thanx...feel free to email me at traynham.houston@gmail.com
hey you can run down I40 East all the way to Statesville and get on I77 south, that will take you south all the way to exit 18 on I77. from there you just take a right off the exit and the mall is up on the right. Im pretty sure thats how it goes, can any one confirm this for me

lt1_rx7 02-28-06 06:21 PM

thanx...so roughly how far is it on i-77?? just wondering if it would be shorter/quicker to possibly head towards charlotte...(i77 is one of the roads i dont know!!)

Racedog 02-28-06 06:35 PM

It might be faster to take 74 thru Shelby to 85N toward Charlotte and go from there. Check www.mapquest.com that will tell you the quickest way (not being a smartass).

Skylance 03-01-06 10:34 AM


Originally Posted by Racedog
It might be faster to take 74 thru Shelby to 85N toward Charlotte and go from there. Check www.mapquest.com that will tell you the quickest way (not being a smartass).

But, if at all possible, don't go through Shelby. 74 would save time, except for the 3,739 traffic lites that are in just shelby's little section of 74.

But yeah, since you are in Asheville, I'd go East on I-26 (Towards Spartanburg, columbia, etc). Exit onto hwy 74 and head East. You'll go through Shelby and Kings Mountain before you can exit onto I-85. Go Northbound on I-85. You'll go pass Gastonia and go into Charlotte. Take I-77 South and follow the previous directions to the mall.

Like I said though, Shelby will be no fun at all with all the traffic lites.

The simplest way to bypass all that would be to take I-26 East until you get to Spartanburg where it intersects with I-85. Take I-85 Northbound. You'll go past Gastonia and go into Charlotte. Take I-77 South and follow the previous directions to the mall.

It's really your call, but those are best ways I can think of if you are coming from Asheville.

84gsNC 03-01-06 10:35 AM

Found a 12a in Winston for 125 bucks, goin in Fri. so I should be able to make it now

FB II 03-01-06 10:36 AM

so far still lookin good for my beast. should be out there with it in full effect and go ahead and count my friend TOM in. he's got a 1st gen that will be coming out there with me. (he's not a member of this forum :( )

Seb Banas 03-01-06 10:53 AM

I hate to be another "try to come", but I will. It's a bit of a drive for me (New York), but it looks like the only meet on the calendar this year, so I want to be there.

Skylance 03-01-06 10:58 AM

DUDE!!! Holy Cow. New york huh?!?

I don't know how easily you can just up and come down this way, but if you can only afford/make/whatever one trip, I'd wait until Deal's Gap if I were you. But yeah, we'll be glad to have you.

lt1_rx7 03-02-06 12:10 AM

thanx skylance...my sister lives in charlotte, so i know the shelby strecth pretty well...but ur saying i want to take 77 south out of charlotte?? i was thinking that in charlotte i would want to go north to get to exit 18...anyone have an address i can mapquest please??

MrFC3S 03-02-06 01:41 AM

Hey, Gime an Addy(mapquest cause im a dummy) and count me and my 87 GXL in...

Skylance 03-02-06 08:07 AM


Originally Posted by lt1_rx7
thanx skylance...my sister lives in charlotte, so i know the shelby strecth pretty well...but ur saying i want to take 77 south out of charlotte?? i was thinking that in charlotte i would want to go north to get to exit 18...anyone have an address i can mapquest please??

You may be right about that. can someone please confirm this?

aspirao 03-02-06 09:01 PM

yes you want to get on 77 northbound to get to the mall!!

PerkyStina 03-02-06 09:39 PM

Man... I wish I was closer down there. I'd definitely come! I might be down in the area visiting Smoken' (Steve) in May-ish, so perhaps you guys will be getting together again.

I can't wait for warm weather. Today was awesome.

Skylance 03-03-06 07:09 AM


Originally Posted by aspirao
yes you want to get on 77 northbound to get to the mall!!

Ha ha silly me!

Slappy360 03-03-06 05:08 PM

Got the Master and Slave Cylinders installed...bleed the air...Now the damn car won't start! I stopped driving it over a year ago when the clutch master went out...was running fine then. Gotta pull the fuel pump/lines and see whats up. Hopefully will have it running in 2 weeks!

sleeperfc 03-04-06 03:25 AM

my car should be done.... i dont know if ill be back from wcu that weekend.

we just got into town today and this comming week is spring break. Its a 3 hour drive to come back and well... im not sure if ill have a ride back one week after spring break.

we will see. really depends on how the car is at the end of this week.

zensokuracer001 03-05-06 11:17 AM

man alomst time for the meet.

rejekt 03-05-06 03:14 PM

hey y'all, i'm new to the site, and about to buy a fc rx7 with the 13bt engine in it and was wondering if any of y'all was from around the fayetteville area. was wondering if i could get help with an install or if y'all can point me in a direction that can help

Skylance 03-05-06 04:16 PM

Welcome :wave:

Sorry, can't help you with the install myself. I've got my own project going on now. There should be plenty of people here willing to help though. Could also try www.rx7world.com.

rt turbo 03-05-06 05:14 PM

hey, i told rotorsports about it. i think they may be down to make a showing.

also, i went to the go cart place and i found out that we can get a discount for an hour ride if we have enough people and we put mone down to hold a spot. is anyone interested? these carts are bad ass. they do over 40mph.

robs_seven 03-05-06 05:31 PM

that sounds like it would be fun but we need to make sure we give our selves plenty of time to eat and talk about things. since this is the first meet we need to make sure that is the priority. not saying the go-carst arent a good idea i would like to do it but is there a time frame we would haveto meet and how much is it first off

Skylance 03-06-06 07:20 AM

Sounds cool to me.

If we do this, we should all put this in our sigs - "Official NC RX-7 Go-Kart Racing Club"

Ha ha. :lol:

NC_FC3S 03-07-06 08:46 AM

Well it's looking like I'll probably be able to make it. Got the vert back last week with a "new" transmission in it... As long as it holds out for another couple of weeks, I'll be there. Noticed some serious vibrations (buzzing) at certain rpms that transfers through the shifter. Kind of annoying on long drives... Anyway, I'll keep my fingers crossed that this tranny doesn't go out on me !

Keith
'90 RX-7 vert

84gsNC 03-07-06 08:12 PM

My 12aT is back!!!!!hahaha
Got the motor in this past sat. Still got a few little kinks left in it to work out, but will defineatly be there.

sleeperfc 03-08-06 12:17 AM

we started putting my kit on tonight. the car will be ready but i dont know if ill be in town.

its still up in the air

FB II 03-09-06 06:38 PM

i'm gonna be cuttin it real close, but i should be there... car painted and everything!

robs_seven 03-09-06 08:42 PM

wish mine was all done like some of you guys but its running and its going good so far knock on wood. well just over a week till the meet. any body come up with an idea where to eat, or anything else about the gocarts????? its getting close so we should try to get most of this figured out now and not wait till that night.

zensokuracer001 03-10-06 11:23 PM

any new updated list up yet of whos comming?

sleeperfc 03-10-06 11:51 PM

well my car should be ready.... i plan to take it out tomarrow night.

it wont be painted after the kit install so i would be rocking out two tone.

but the good news is... i can boost it again.

GTUser 03-11-06 07:43 AM


Originally Posted by NC_FC3S
Well it's looking like I'll probably be able to make it. Got the vert back last week with a "new" transmission in it... As long as it holds out for another couple of weeks, I'll be there. Noticed some serious vibrations (buzzing) at certain rpms that transfers through the shifter. Kind of annoying on long drives... Anyway, I'll keep my fingers crossed that this tranny doesn't go out on me !

Keith
'90 RX-7 vert

Hey Keith, great to hear that you got the tranny rebuilt and are ready to rumble. Since I'm not going to be able to make it to Deals Gap this year I am going to Charlotte next weekend.

I will find out tonight if we have any other RRDI members going down to Charlotte for the rotor fest. It would be fun to go down to Charolotte the back way and maybe find some fun roads to drive. We should have a good turnout tonight after the last Drive-In and today's weather forecast. Hope to see you at the Char Grill,

Bert

Johny zoom 03-12-06 07:19 AM

Please post a physical adress so some of us from out of town can mapquest it.

robs_seven 03-12-06 07:36 AM

http://www.shopnorthlake.com/infodesk/directions.html


here is the link to the mall directions, i tried map questing it and it will not work for me but here are some basic directions

everyone look onthe area map provided on the link and see where you think we should meet, it gives store names and i think we should meet in front of dicks or behind the theater area. just my opinion but we need some one in the area to tell us where is the best place to meet up so we dont get ran off

rt turbo 03-12-06 09:25 AM

i say in front where everyone can see us and evyously drool over themselves.

robs_seven 03-12-06 10:05 AM

yeah thats what i think infront of diks sporting goods is right in front of the main entrance and in front of the road so thats where we should do it

sleeperfc 03-12-06 10:12 AM

what time of day?

robs_seven 03-12-06 05:16 PM

meet at mall between 4 and 4:30 if possible

rt turbo 03-12-06 06:57 PM

why so late?

robs_seven 03-12-06 08:25 PM

some people had to work and some people are coming from sc i think just a time taht was mentioned in teh first thread

shawnk 03-13-06 06:22 AM

Well as of yesterday mine is back on the road! 20 miles so far on the new engine. I will be there for sure and if it is a nice weather day I will probably be there early if others want to come out early. As far as eating goes there is an excellent local mexican place called Aztecca about 2 miles away. Also right there at the mall there is an "On the Border", Panera and of course the food court at the mall.

shawnk 03-13-06 06:45 AM

Directions - you can map this as the destination:

W Wt Harris Blvd & I 77
Charlotte, NC 28201, US

The mall is just west of this intersection on Harris Blvd.

Here is a closeup map - the yellow rectangle is the mall.

http://www.3rdgenrx7.com/images/mallclose.gif



And here is a smaller scale map to show you were that intersection is in relation to downtown Charlotte.

http://www.3rdgenrx7.com/images/map.gif

robs_seven 03-13-06 05:45 PM

well im not sure who is taking control of this meet and scheduling everything but, i read in the first threaad to meet around 4 - 4:30. if some of you would like to get there a little earlier then i figure that would be fine. we should meet infront of the main entrance. i think the parking lot has valley parking in the very front. so out in front of dicks i think would work nice. i figure stay more toward the rear of the lot to a void causing any problems. i know cops and security there can be a pain. once everyone gets there and gets to look around and we can talk about deals gap and possible future meetings we should caravan to some where to eat. there we can continue talking and meeting everyone. i think the earlier we can meet the more availvable time and the more relaxed and smooth it will go. so here are some guide lines

if anyone has any suggestions let us know ASAP i think it would work nice like this

Where North Lake Mall (infront of Dicks Sporting Goods)
When No later then 4-4:30pm. (Earlier the better, possibly 3:30 at the earliest if wanted)

Agenda Meet
Greet
Discuss Topics
Eat

quicksilver_rx7 03-13-06 11:10 PM


Originally Posted by lt1_rx7
hey, i'm in asheville NC...i would love to come, but i dont know how to get there!!! please help! anyone able to give me directions? thanx...feel free to email me at traynham.houston@gmail.com

Your quickest way is comming through Shelby on 74 E and picking up I-85 in Gastonia. Trust me, I drive all over the state.

Joe

quicksilver_rx7 03-13-06 11:23 PM

I plan to be there early as well, driving another RX-7 if it works out. I may get there between 2 & 3 for those that want to come early. I originally scheduled between 4 - 4:30 to give all of the "out-of-towners" time to get there before the meet fizziled. It looks as though the turn-out is going to be excellent.

As fas as for food, as Shawn mentioned, there are plenty of places to eat. To add to the list, Harris Grill has excellent food and it's not too expensive (it's not McDonald's either). Whatever the crowd decides is what we'll do.

As for the Go-Karts. That sounds like it would be a lot of fun and we can definitely do it, if everyone wants to. We should allow enough time for everyone to hang out and get to know each other, though. As for the discount, I'm about 99% positive we can get a pretty good one without a deposit if we have enough people.

The weather looks good too. Sunny and 61 for the high. Should be a nice day. I look forward to meeting some new faces and seeing some old ones.

See ya'll Saturday.

Joe

capn 03-14-06 04:10 PM

Hell yeah im there guys thats just like 15 min from the UNCC campus

rt turbo 03-14-06 04:31 PM

i might have to pass on the carts myself even though it was my idea... i leave sunday for snowboarding at jackson hole


All times are GMT -5. The time now is 11:15 PM.


© 2024 MH Sub I, LLC dba Internet Brands