Need a shop near Atlanta GA or Birmingham Alabama.
05-20-18, 12:33 PM
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: AL
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Need a shop near Atlanta GA or Birmingham Alabama.
Hello,
I have a 1993 RX7, I bought the car about a year ago from a credit union as a repo. The ECU had been taken out. I let the car sit for about a year before I messed with it. I finally got the car running and it smokes really bad and is leaking coolant. From what I have read or seen it seems like the car might have a bad water seal. Can anyone recommend a shop to look at the car for me or someone to rebuild the engine if it comes down to that, I could pull the engine myself. I just don't want the car sitting at a shop for 2 years, I've dealt with that in the past. Below is a mod list on the car.
13B TT - STAGE 3 CUSTOM BUILT ENGINE
Streetport Intake & Exhaust
AWR Aluminum Radiator
Greddy Intercooler Stock Location
Efini pip kit
Greddy Piping Kit For SMIC (2-piece)
Trust/Greddy Dual Filter Intake
RSR 3rd Gen Rx-7 Sparkplugwires with Competition Sleeving
Rebuild Stock Twin Turbos
FD Secondary Fuel Injector Kit-1600cc Injectors, Fuel Rail, SX Fuel Pressure Regulator, High Flow Fuel Pump & Filter
Light Weight Flywheel
ACT HD Clutch & Clutch Line Kit
Power FC - FD RX7
FC commander for power FC
Radiator Fuel System Upgrade Intercooler, Piping kit
Greddy Profec Boost Controller
RP Competition Fuel Pump
Racing beat Duel Exhaust
TKT Lightpower Pulley Kit Black
TKT Pillar Mount Boost Gauge Kit
Computer Upgrade
Exh 3 SS downpipe
EXH 3 SS Res CTR section
I have a 1993 RX7, I bought the car about a year ago from a credit union as a repo. The ECU had been taken out. I let the car sit for about a year before I messed with it. I finally got the car running and it smokes really bad and is leaking coolant. From what I have read or seen it seems like the car might have a bad water seal. Can anyone recommend a shop to look at the car for me or someone to rebuild the engine if it comes down to that, I could pull the engine myself. I just don't want the car sitting at a shop for 2 years, I've dealt with that in the past. Below is a mod list on the car.
13B TT - STAGE 3 CUSTOM BUILT ENGINE
Streetport Intake & Exhaust
AWR Aluminum Radiator
Greddy Intercooler Stock Location
Efini pip kit
Greddy Piping Kit For SMIC (2-piece)
Trust/Greddy Dual Filter Intake
RSR 3rd Gen Rx-7 Sparkplugwires with Competition Sleeving
Rebuild Stock Twin Turbos
FD Secondary Fuel Injector Kit-1600cc Injectors, Fuel Rail, SX Fuel Pressure Regulator, High Flow Fuel Pump & Filter
Light Weight Flywheel
ACT HD Clutch & Clutch Line Kit
Power FC - FD RX7
FC commander for power FC
Radiator Fuel System Upgrade Intercooler, Piping kit
Greddy Profec Boost Controller
RP Competition Fuel Pump
Racing beat Duel Exhaust
TKT Lightpower Pulley Kit Black
TKT Pillar Mount Boost Gauge Kit
Computer Upgrade
Exh 3 SS downpipe
EXH 3 SS Res CTR section
07-16-18, 08:40 PM
#4
Did you find a shop? There is a guy in Birmingham named Bob Abercrombie. He is an old school rotary mechanic. Kind of retired but has a shop in his back yard. Really good, very reasonable, and not in any kind of hurry. I can get you in touch with him. He has helped me a lot.
10-21-18, 07:04 PM
#5
Junior Member
Thread Starter
Join Date: May 2004
Location: AL
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Did you find a shop? There is a guy in Birmingham named Bob Abercrombie. He is an old school rotary mechanic. Kind of retired but has a shop in his back yard. Really good, very reasonable, and not in any kind of hurry. I can get you in touch with him. He has helped me a lot.
10-22-18, 01:54 PM
#6
Bob Abercrombie 205-461-4345. Tell him that I gave you his number (Jason Bailey). He is a little difficult to deal with and he takes his time, but he knows his stuff. If you get her up and running, come up to Cars & Coffee on a Saturday morning at Hoover Tactical. A lot of car guys, but not many rotaries. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post