In Stock CJ Motorsports Fuel Systems
 

Im now stocking the CJ Motorsports fuel systems for the 93+ RX-7. I have 3-4 kits in stock and ready to ship.

Info is here: http://www.rx7store.net/category_s/93.htm

What brand are the injectors included with the $1k full kit?

This is from the first sentence of the description:


This kit includes 2x Bosch 1680cc and 2x 850cc primary injectors.

thanks tips, but that implies that the 850's are a different brand.

What impedance are all 4 injectors?

Any response as to the brand of the 850's and the impedance of all four injectors?

The 850's are Siemens and both are low impedance

what ohm if you don't mind my asking?

850cc is 2.5 ohm and 1680cc is 4.5 ohm

Can you respond to my pm?

Thank you!

This is important as I am running a Power FC and needed to know if I needed a P&H Injector Driver, which I would with this kit.

The kit comes with resistors.

Resistors would be fine if the injectors are meant to be ran Saturated, not Peak and Hold.

What mode are these injectors designed for?

The injectors are peak hold which is why you use a resistor. We have run this setup a hundred times with no problems and have been running them for years with no problems. Most of the people using a Power FC and larger injectors use resistors.

Hey Jason;
I just noticed that you guys are doing RX7 projects.
If you guys need any JDM RHD Imported RX7 3rd Gen, or any other JDM RHD cars then you can contact me
at http://www.jdmautodepot.com
We ship all over USA.

Regards

Hell Jason,
I just got back from vacation and would like to know if you've received any fuel pump assemblies from CJ Motorsports. I very excited about this thing. If they build them I will be the Unofficial CJ Motorsports promoter .

http://i254.photobucket.com/albums/h...K/rx7pump1.jpg

http://i254.photobucket.com/albums/h...K/rx7pump2.jpg

in stock huh? havent received mine I PAID FOR in september....

kevin.

You didnt order a fuel system from me.

I orded a kit on 12/17/2010 and a pod but havent gotten any conformation #

Fuel systems have been on backorder since the beginning of time. I have sent emails to anyone that has ordered one letting them know what's going on. I will check today and let you know.

Just an FYI. We found the FJOracing's Peak and Hhold injector driver that has held up our project. Been looking for about a week as production will not begin again till March for these units. Grrr. But, Full Blown has 6, well 5 now on the shelf. 1000 xs better than any resister pack. 1/2 the price of the AEM injector driver. Just thought you would like to know.