dakota's rx7

iTrader: (9)

are you suppost to be able to make changes with your palm with rtek 2.1 while the palm is not pludged into the ecu. because my palm want let me change the settings like make adjustments with the fuel

lastphaseofthis

iTrader: (8)

no, it has to be plugged in, and the key has to be on.

dakota's rx7

iTrader: (9)

ok thanks you i was scared i did the down load wrong

dakota's rx7

iTrader: (9)

well my palm wont connect with the ecu and i got no spark bout to go full stand alone

Nick_d_TII

iTrader: (6)

RTEK won't cause no spark issue. Only Ign. timing and Injector Correction.

dakota's rx7

iTrader: (9)

my palm still wont connect with the ecu though and the owner of the palm and ecu used it befor. every time i go to my fuel map it say something is corrupt. i have major wiring issues the main relay seems to be not working right. also the clip that connect to the cas was broken so i wired up a new one. the wires match the harness but does match the cas it plugs into. i have a 89 tii engine and s4 na battery harness(which i believe the battery side harness has the cas in it) and a s4 tii ecu harness. i moved my battery to the back passenger bin and removed the old battery wiring

MIDNFauciUSN

iTrader: (8)

you need to re-do the logger install on the palm... then try it again.

dakota's rx7

iTrader: (9)

what program do i need to do this? and what the heck is hot sync

MIDNFauciUSN

iTrader: (8)

hotsync is the uh program... or protocol? used to talk between the palm and the pc/mac.

basically, you need a computer with windows xp for an older palm. use that program to install the logger onto the palm.