RX7 Logger
 

What is the difference RX7 Logger 2.1.0 and 2.1.3? Alternatively, other versions?

2.1.3 Build 1
Restructured code that decides how to draw 3d map so that map size and associated parameters are determined from ECU type/version only once
Updated several case statements to default to latest version for subsequent versions instead of defaulting to old versions.
Changed N351 AFMTemp param index
AFM Temp no longer interpolated in Scale.cpp for N351, done in ecu now
Changed VE table bargraph scaling to show 0 to 150%
Limit value change on 3d graph and table to 150%
Adjust VE 3d graph parameters to draw 0-150% correctly
Changed max chars for map name to 19 due fixing buffer overrun bug

v2.1.2 build 6
Slowed down map updates when loading maps into ecu.

v2.1.2 build 5
Fixed bug with paramlistupdate that would keep param list from updating after going into ECUSetup screen on ECUs that do not have ISC.
Removed NoAFM mode checkbox on N370

v2.1.2 build 4
Updated FeatSupport for N370 and no mop option so it works with 0.0.3
Fixed inversion mask for N370 outputs. Still had N351 mask
Changed VE scaling


v2.1.2 build 3
updated N370 tables to latest size.
updated some stuff with VE code.


v2.1.2 build 2
Fixed hard coded VE table size in getmapval in ve.cpp
removed VDI,6PI,ET-AC from N370 outputs
changed VE table value scaling
Updated N370 modes and changed ECU setup screen code to handle new mode defs.


v2.1.2 build 1
Bunch of updates for extended maps on S4NA
added code to force the analog VR mode on N326 >= ver1.1.0
Found a bug in UpdateParamList that kept the function from working on the N326

v2.1.1 build 3
Fixed inj DC not showing up even if pref set when viewing log or live data.

v2.1.1 build 2
Fixed missing ecu switch statements in diag
Changed timing table physical size, it wasnt big enough for N370
Fixed show/hide issues with ECU setup screen and the N370

v2.1.1 build 1
Copied 2.1 build 4 over
ported all updates from N370 fork back to this version
Fixed bug that kept data from displaying on the newer palms.

v2.1.0 build 3
Fixed bug that caused user to be unable to delete maps

v2.1.0 build 2
Fixed issue where the palm defaulted to verison 1.0 S4T2 ECU which kept the ANALOG_VR from being displayed when viewing a log.

v2.1.0 build 1
Initial 2.1 release

Thanks, I Installing 2.1.3.

It will continuously display the changelog somewhere? Maybe with the current version ?

v2.1.3 build 2
Fixed problem where if N332 ECU inadvertently came out of 'VarRes as Analog' mode there was no way to put it back. VR as Analog mode now forced on.


http://www.digitaltuning.com/software/rtek.zip



.

v2.1.3 Build 4

Fixed labels on timing map for S5T2 in MAP based timing mode.

http://www.digitaltuning.com/software/rtek.zip

I've updated to Build 4, but its my first time using it since I just got my rtek 2.0, but from what I've seen, the only problem is when you go to setup the external sensor, it doesnt recognize that I have Pin 3F, so it gives me ATP and VARES tabs only. Funny thing is, if you adjust those, it will also ajust the Pin 3F input when you datalog... which is good. Just letting you know for the next build :)

Also it would be nice if you could chance the name when you data log from Pin 3F to Wideband O2, or something. :)

Great software btw, and I absolutely love the map viewing mode!!!

v2.1.3 Build 5

Fixed labels on fuel map on turbo ECUs to show in PSI/inHG or BAR/mmHg instead of +/- PSI

www.digitaltuning.com/software/rtek.zip