Rtek 2.1 ECU *inside*
 

Here is the inside of the stock ECU with the RTEK 2.1 installed.

You can see the traces on the back of the circuit board, the daughter board on the front and the chip.

I had to see...

http://i272.photobucket.com/albums/j...3/P1281917.jpg
http://i272.photobucket.com/albums/j...3/P1281913.jpg
http://i272.photobucket.com/albums/j...3/P1281916.jpg
http://i272.photobucket.com/albums/j...3/P1281927.jpg

What actually were looking at?

the chip and daughter board for the rtek 2.x

He's showing the location of the *chip*.

http://i23.photobucket.com/albums/b3...tek7Stage2.jpg


ZOMG how do I put this thing in there?

Hey I never got a sticker :)

Nor did I get a sticker...... BUmmer, I wanted to put a new sticker of somesort on my rad cooling panel.

Website will tell ya. A small flathead works great to pull the existing one out.

dammit, i want a sticker

Yeah I found a video over there at Digital Tunings website.

Did you guys get the Digital Tuning license plate frame with the actual Rtek??

You fking teasing? :0)

no. i was genuinely curious. I'll find mine, it's around here somewhere.

Ahhhh, that is cool. I was just being sarcastic. I found a real nice Mazda RX-7 one at the wrecker recently.

I found it today:
http://i23.photobucket.com/albums/b3...d/100_5376.jpg


I think I might black out the website though.

once you drove it with the rtek chip did u feel a difference?

do you mean BEFORE the 2.1 update or after?

after

I noticed that I can start my car at any time with the 2.1. I love the fuel adjust for my startup. the idle adjust is really conveinent. Haven't messed with the timing or fuel curves because I'm back to stock booste. Definatly worth to$10 upgrade price. Oh and my atmo sensor works again

i just got this GXL 88' and they swapped it with a turbo im sure its stock ECU cause i see it pushing 5p.s.i . im thinking of getting that chip put in. so where can i find that place where u did it cause i hear its best on those cars.

I have the Rtek7 Stage 2.1 ECU and my TII only pushes 5 psi, I don't believe the ECU has anything to do with how many psi your turbo makes. If your wastsgate was ported you'll need a boost controller to raise boost levels above that 5 psi mark.

The company is Digital Tuning http://www.pocketlogger.com/index.php?pid=rtek7Digital tuning - Rtek7 ECU. You could have tried searching "Rtek7" on yahoo or google.

The 2.1 is capable of ruining your engine if not used correctly. I think you should do some reading on your car before you try to do anything to the car or you might end up rebuilding sooner than you think.

im so poor!!! but i want one!! haha

Settings
 

what are your settings for start up and hotstarts.....

I just pulled them down a little on the upper temp ranges. It still needs more because I flood a little when its warm, but I just use the flood clear and it fires right up... Maybe someone else has it perfected?