Rtek Official Android Rtek Thread
#151
Full Member
I'm down for one as well!!!! Glad to see some progress. I will also be sending my S4 NA ecu to be Rteked soon! I love it with my TII! I have a friend who spent 3 times more than me on his build most of it on the ecu and he barely pulls ob me. Super happy!
#153
I fixed the fatal error with the bargraph screen.
I found the easiest way to install the palm app in Styletap is to download it off the web, then click it and it will install it in styletap. So I put the file up unzipped so you can do so.
www.digitaltuning.com/software/rx7_logger_bt.prc
Current version is 2.1.3 Build 7BT
Thanks to righthandfc for talking with the styletap guys to get info on the error.
I also found that uninstalling styletap and reinstalling renews the 14day trial..
I found the easiest way to install the palm app in Styletap is to download it off the web, then click it and it will install it in styletap. So I put the file up unzipped so you can do so.
www.digitaltuning.com/software/rx7_logger_bt.prc
Current version is 2.1.3 Build 7BT
Thanks to righthandfc for talking with the styletap guys to get info on the error.
I also found that uninstalling styletap and reinstalling renews the 14day trial..
#155
Glad i can help... Cool, will try it on my new tablet, upgraded from the 7inch to the 10inch and was worried the trial version followed my account... Thanks for the info
#164
rx-for-my-7
iTrader: (1)
Was playing with this last night, entering some map based timing values and encountered a few problems:
1) Connection to the ECU seems to drop randomly
2) Someitmes I get an error similar to "Unexpected Table Size"
3) Eventually it stopped allowing me to select cells and change them via the tablet and bluetooth.
4) Using the palm and serial connection I was able to resume the job and finish the timing table.
Any ideas?
1) Connection to the ECU seems to drop randomly
2) Someitmes I get an error similar to "Unexpected Table Size"
3) Eventually it stopped allowing me to select cells and change them via the tablet and bluetooth.
4) Using the palm and serial connection I was able to resume the job and finish the timing table.
Any ideas?
#165
Was playing with this last night, entering some map based timing values and encountered a few problems:
1) Connection to the ECU seems to drop randomly
2) Someitmes I get an error similar to "Unexpected Table Size"
3) Eventually it stopped allowing me to select cells and change them via the tablet and bluetooth.
4) Using the palm and serial connection I was able to resume the job and finish the timing table.
Any ideas?
1) Connection to the ECU seems to drop randomly
2) Someitmes I get an error similar to "Unexpected Table Size"
3) Eventually it stopped allowing me to select cells and change them via the tablet and bluetooth.
4) Using the palm and serial connection I was able to resume the job and finish the timing table.
Any ideas?
2)try using the original rtek app, before he updated it. it maybe something in the software again. it worked fine with the 2.2 software. ill mess with it this weekend on mine...
#166
rx-for-my-7
iTrader: (1)
I am using the bluetooth adapter that was linked to in this thread, this one: Wireless Serial Bluetooth adapter with RS232 interface . It doesn't loose the bluetooth syncg just the ECU connection in the Rtek screen.
It seemed to be working fine for the simple stuff but after a few rows of timing values it started to get slow and then showed other symbols on the screen in addition to the map, timing and rpm buttons, kinda glitchy. Shortly afterwards it wouldn't allow me to even select cells, let alone change the values. I did reboot the tablet, tuned the car off and back on, kept it on a charger the whole time so the car had +13.9v.
I'll try again with the earlier version maybe.
Thanks!
It seemed to be working fine for the simple stuff but after a few rows of timing values it started to get slow and then showed other symbols on the screen in addition to the map, timing and rpm buttons, kinda glitchy. Shortly afterwards it wouldn't allow me to even select cells, let alone change the values. I did reboot the tablet, tuned the car off and back on, kept it on a charger the whole time so the car had +13.9v.
I'll try again with the earlier version maybe.
Thanks!
#167
Hey guys, The BT adapter is on our site now.
There is no separate page for it, it's listed in the pulldown on the stage 2 pages. The unit is the same for all ECUs.
Rtek7 ECU Upgrade Detailed Information
We have a limited number in stock right now, but we are making more.
There is no separate page for it, it's listed in the pulldown on the stage 2 pages. The unit is the same for all ECUs.
Rtek7 ECU Upgrade Detailed Information
We have a limited number in stock right now, but we are making more.
#171
The requirements are that the Android device has bluetooth and supports the SPP profile. The cheaper tablets may not support SPP.
I don't know what Android OS version styletap requires off hand.
I have not tried using BT on a T3. In theory it should work, and if you are interested in that route, I can certainly work with you to address any issues you may run into.
I don't know what Android OS version styletap requires off hand.
I have not tried using BT on a T3. In theory it should work, and if you are interested in that route, I can certainly work with you to address any issues you may run into.
#174
https://community.verizonwireless.com/thread/336065
What are the voltage requirments of the BT dongle i just bought from your site. just trying to figure out where to wire it in.