narrowband signal from a wideband
 

I am running the Rtek 2.1 on my 10AE with BNR stg3 and 720/1000 injectors. I will be utilizing an AEM UEGO wb02 and was wondering if its possible to tie in the 0-1v wire from the controller into the factory wiring to use as a narrowband signal. The idea is to eliminate the factory narrowband sensor and use only the UEGO.

It's in the sticky.

https://www.rx7club.com/rtek-forum-1...t-dont-577999/

I was having problem doing that and running with the o2 sensor installed anyway. For some reason the car kept going super lean 17 - 18. After ditching the o2 sensor the car worked perfectly from there. Maybe it was just my car.... :(

I just learned that my AEM does not have a simulated narrowband output anyway, so I'll have to run with the stock sensor as well.