SoCal IDRC event!
Ok SoCal guys, we finally have an event coming for us. Sat June 13 at California speedway drag in Fontana. I'm going to be running my car and have a few other friends getting their cars ready too. So all you rotary guys, lets get out there and represent, no excuses, get out there and race and have some fun. Who's in?
|
Idrc
i will be running my bucket:)
|
I say 3 rotaries top if the eric darby shows up with his A/M rx-7, He should run 10.30s with a carburator on pump gas (crazy guy) good luck to all that run.....
|
Originally Posted by rotorholic
(Post 9247022)
I say 3 rotaries top if the eric darby shows up with his A/M rx-7, He should run 10.30s with a carburator on pump gas (crazy guy) good luck to all that run.....
Manny, any way you can haul your car back to this event? |
Working hard trying to get the car back together
Originally Posted by ultimatejay
(Post 9248790)
Hey hopefully Eric, Rene, Steve, and Albert can all make it. That would be 6 rotaries that I know that will be there. Last event I went to there was only one rotary. :(
Manny, any way you can haul your car back to this event? Thanks for the words of encouragement. I have been sitting on the sidelines for the past couple of years so I am very eager to get the car back together. I just picked up all my safety equipment from Deist around the corner from my house. Albert |
I regret painting my blue RX-3. Now I cant have fun with it. it became an ornament in my driveway :(
|
Originally Posted by rotaryengineering
(Post 9249487)
Jay,
Thanks for the words of encouragement. I have been sitting on the sidelines for the past couple of years so I am very eager to get the car back together. I just picked up all my safety equipment from Deist around the corner from my house. Albert |
Wish they would come back to the east coast. IDRC started it all!
|
1 Attachment(s)
still waiting on my tranny so my all motor car wont make it to this event, it does look sexy as hell tho :) ill throw in a sneak peak pic
james is waiting in his microtech so he wont be there either ill be there with eric hangin out tho... |
Originally Posted by 680RWHP12A
(Post 9250964)
still waiting on my tranny so my all motor car wont make it to this event, it does look sexy as hell tho :) ill throw in a sneak peak pic
james is waiting in his microtech so he wont be there either ill be there with eric hangin out tho... |
Idrc
ultimate jay it looks like you and me.i have all the parts i am going to change on the car this weekend.i will be ready for he show.are you ready for the 1/4?
|
I won't be ready ,no time available . the car ran 5.72 @107 sleeping last time out at the 1/8,but to much boost is getting inside the crack case and blows oil out the motor , internals maybe bad .
|
james is waiting for money.
|
Originally Posted by mazda rx2 rotary
(Post 9268727)
ultimate jay it looks like you and me.i have all the parts i am going to change on the car this weekend.i will be ready for he show.are you ready for the 1/4?
|
idrc
looks like i'll also be going. car is ready to go
|
Originally Posted by pportrx3
(Post 9272189)
looks like i'll also be going. car is ready to go
Crap! I just read the IDRC classes and I just removed my stock fuel tank and put a fuel cell in. But they don't allow fuel cells in the pro-am all motor class. I could have run in the pro-am all motor class since I have all glass windows and stock dash board. Oh well, I'll just have to get whipped in the All-motor class. I hate bracket racing. |
Hey I just noticed in the all motor class they don't allow anitfreeze/coolant in the cooling system. So are you allowed to use water wetter or some other kind of attitive so that the aluminum doesn't corrode. What are you guys using?
|
i am using just plain sparkletts water,thats why my car is fast.
|
Originally Posted by 61620B
(Post 9275877)
i am using just plain sparkletts water,thats why my car is fast.
|
No because the consentrated lead weight particals will slow you down,Huh sparkletts(JOE).
|
Originally Posted by 61620B
(Post 9277158)
No because the consentrated lead weight particals will slow you down,Huh sparkletts(JOE).
|
Originally Posted by ultimatejay
(Post 9275258)
Hey I just noticed in the all motor class they don't allow anitfreeze/coolant in the cooling system. So are you allowed to use water wetter or some other kind of attitive so that the aluminum doesn't corrode. What are you guys using?
they dont check that shit. make sure you have all your lugnuts and if your battery is re located have a cutoff switch.... newbs:icon_no2: |
Originally Posted by racerlinkfc
(Post 9278300)
they dont check that shit. make sure you have all your lugnuts and if your battery is re located have a cutoff switch.... newbs:icon_no2:
|
they wont check the flywheel either. but you wull need a fire jacket, helmet and a 6 point cage if you go 11.99 or quicker.. i dont think you need to worry about going that fast yet tho.... ;)
|
Originally Posted by racerlinkfc
(Post 9279234)
they wont check the flywheel either. but you wull need a fire jacket, helmet and a 6 point cage if you go 11.99 or quicker.. i dont think you need to worry about going that fast yet tho.... ;)
|
All times are GMT -5. The time now is 04:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands