Nopi announces new class for RX7's
Thread Starter
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Originally Posted by f1blueRx7
[I]
No aftermarket Transmissions of any kind allowed.
Aren't you using a PPG trans Ernie?
No aftermarket Transmissions of any kind allowed.
Aren't you using a PPG trans Ernie?
Thread Starter
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Originally Posted by enzo250
where do they have that rule posted?
I didn't see it anywhere? Right now it states 70.7mm as the max size...
I didn't see it anywhere? Right now it states 70.7mm as the max size...
BOOSTED Vert
Joined: Sep 2002
Posts: 2,307
Likes: 0
From: Miami
Originally Posted by f1blueRx7
Bolt on modifications only. Aftermarket cams, headwork, valves, cam gears and other internal modifications allowed.
I'm assuming street porting and bridge porting would be fine, however with a peripheral port you would just have to maintain a single throttle body per the induction rules.
No aftermarket Transmissions of any kind allowed.
Aren't you using a PPG trans Ernie?
I'm assuming street porting and bridge porting would be fine, however with a peripheral port you would just have to maintain a single throttle body per the induction rules.
No aftermarket Transmissions of any kind allowed.
Aren't you using a PPG trans Ernie?
Sponsor
Joined: Feb 2007
Posts: 123
Likes: 1
From: Texas, USA
Hi,
I just wanted to post some rules update. This is some syuff that I wasn't sure on. Looks like the weight for the rx7 is 2700lbs (1 or 2 power adders) and you CAN use front runners. You must use DOTs for drive tires bu front runners are legal.
Good luck -
I just wanted to post some rules update. This is some syuff that I wasn't sure on. Looks like the weight for the rx7 is 2700lbs (1 or 2 power adders) and you CAN use front runners. You must use DOTs for drive tires bu front runners are legal.
Good luck -
Originally Posted by MARTIN
turbo runs only one. I wonder if its the same rule for the n/a guys..
Hehe, tell that to the MPS guys.
http://mpsys.ca/
Senior Member
Joined: Jun 2002
Posts: 420
Likes: 0
From: S.A. Texas/Tokyo Japan
I know this is not what your looking for but I made it in the top 16 field (sportsman turbo/street) of 22-24 cars. Placed 15th with a 11.2. IF the FC could have been in the power/street class, my time would have been good enough for 2nd out of 10 cars.
Whats the difference between the two sportsman classes?
ari ran one pass at 9.9 showed up late.
Yellow rx8 of Ken S ran 7.## mids
Did not see Jigsaw run.
R100 out of N Y ran in the 6s ??
Need more rotary car in the sportsman classes. Only one 3rd gen and myself!
Whats the difference between the two sportsman classes?
ari ran one pass at 9.9 showed up late.
Yellow rx8 of Ken S ran 7.## mids
Did not see Jigsaw run.
R100 out of N Y ran in the 6s ??
Need more rotary car in the sportsman classes. Only one 3rd gen and myself!
Junior Member
Joined: Feb 2007
Posts: 5
Likes: 0
From: new jersey
Originally Posted by chuck8313BTSDS
I know this is not what your looking for but I made it in the top 16 field (sportsman turbo/street) of 22-24 cars. Placed 15th with a 11.2. IF the FC could have been in the power/street class, my time would have been good enough for 2nd out of 10 cars.
Whats the difference between the two sportsman classes?
ari ran one pass at 9.9 showed up late.
Yellow rx8 of Ken S ran 7.## mids
Did not see Jigsaw run.
R100 out of N Y ran in the 6s ??
Need more rotary car in the sportsman classes. Only one 3rd gen and myself!
Whats the difference between the two sportsman classes?
ari ran one pass at 9.9 showed up late.
Yellow rx8 of Ken S ran 7.## mids
Did not see Jigsaw run.
R100 out of N Y ran in the 6s ??
Need more rotary car in the sportsman classes. Only one 3rd gen and myself!
any one know anything about this r100 http://www.wrex-racing.com/images/me...pi/Nopi.flash/
Thread
Thread Starter
Forum
Replies
Last Post
Wicked93gs
Other Engine Conversions - non V-8
0
Aug 23, 2015 10:14 AM
