RX7Club.com - Mazda RX7 Forum
Page 1 of 3
1
2
3
Show 50 post(s) from this thread on one page

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Rotary Drag Racing (https://www.rx7club.com/rotary-drag-racing-167/)
-   -   KILO Racing Street FD (Florida) (https://www.rx7club.com/rotary-drag-racing-167/kilo-racing-street-fd-florida-1014752/)

MR.45 10-14-12 05:34 PM
KILO Racing Street FD (Florida)
 
My 93 RX7. Motor Built and Tuned by KILO Racing. Car has A/C, Full interior, Stock Driveline with E.T. Streets. Car went 6.2 Last year on 28psi of boost, starting to get back to the track again hoping to put down some new times with more boost.

6.2 Pass

https://www.youtube.com/watch?v=LU3XIVaKHyM


Recent 6.4 Pass

https://www.youtube.com/watch?v=qfNU_S5nViA


http://imageshack.us/a/img29/8161/img20121014175716.jpg


http://imageshack.us/a/img502/6580/i...1014175039.jpg


http://imageshack.us/a/img824/3783/97604889.jpg

http://imageshack.us/a/img706/6261/picture34t.jpg

http://imageshack.us/a/img685/5384/picture36m.jpg


http://imageshack.us/a/img248/4438/picture27r.jpg

MOBEONER 10-14-12 07:10 PM
link doesnt work! nice numbers tho

djseven 10-14-12 08:24 PM
Clean car and nice numbers.

864angel112 10-14-12 09:07 PM
Good looking car man, how is the clutch doing. How much power you making now.

just startn 10-15-12 12:17 AM
Very nice! That thing is Moving out! Info on engine/turbo/trans/rearend?

MR.45 10-15-12 07:11 AM
Thank you! Clutch not doing so great lol. The 6 puck only lasts a few passes before it starts to slip. (SK8world) has been helping me with getting that fixed tho. Car is in the 700hp range. 13B HalfBridge, 2mm seals, GTX45R, E85, Stock Trans, Stock Rear w/ Kazz Diff

C. Ludwig 10-15-12 09:17 AM
Beautiful car! And very fast too. I'm jealous as hell! :D

aruba 10-15-12 03:20 PM
Originally Posted by MR.45 (Post 11255618)
Thank you! Clutch not doing so great lol. The 6 puck only lasts a few passes before it starts to slip. (SK8world) has been helping me with getting that fixed tho. Car is in the 700hp range. 13B HalfBridge, 2mm seals, GTX45R, E85, Stock Trans, Stock Rear w/ Kazz Diff
nice setup
i have 2 stock fd tranny from liberty gears build completely
call me if you need one
786 235 8607 wait time on this is about 10 months from liberty

MR.45 10-15-12 03:33 PM
Originally Posted by C. Ludwig (Post 11255692)
Beautiful car! And very fast too. I'm jealous as hell! :D
lol Thank you sir!



Originally Posted by aruba (Post 11256021)
nice setup
i have 2 stock fd tranny from liberty gears build completely
call me if you need one
786 235 8607 wait time on this is about 10 months from liberty

Thanks for the info! I see your in Florida as well, awesome!

willtet 10-15-12 04:16 PM
saw this car in person at osw, very beautiful car.

Bacon 10-15-12 08:14 PM
Nice #'s, keep at it!! the Sintered iron is the way to go!!

indio84 10-15-12 08:23 PM
Awesome car

river volve 10-15-12 08:27 PM
kilo racing good rotary shop

PDViper77 10-15-12 08:42 PM
Nice setup!

BOOM BOOM 10-15-12 08:57 PM
nice...HOT NUTS..!!!!!!!!

SPEED_NYC 10-15-12 09:52 PM
Nice #'s and a super clean car!! very nice!

Rotor_4_Life 10-16-12 05:41 AM
Originally Posted by MR.45 (Post 11255618)
Thank you! Clutch not doing so great lol. The 6 puck only lasts a few passes before it starts to slip. (SK8world) has been helping me with getting that fixed tho. Car is in the 700hp range. 13B HalfBridge, 2mm seals, GTX45R, E85, Stock Trans, Stock Rear w/ Kazz Diff
Which seals are you using?

Car looks and sounds awesome by the way :icon_tup:

MR.45 10-16-12 07:08 AM
Originally Posted by willtet (Post 11256064)
saw this car in person at osw, very beautiful car.
Originally Posted by Bacon (Post 11256263)
Nice #'s, keep at it!! the Sintered iron is the way to go!!
Thanks! Only reason i never went sintered iron was because a while back I spoke to ACT and when I mentioned it they spoke of it as if it would destroy any transmission it came near lol. Obviously that's not the case so yeah I'm definitely ready to try it out!
Originally Posted by indio84 (Post 11256273)
Awesome car
Originally Posted by river volve (Post 11256279)
kilo racing good rotary shop
Thank you, Yes Kilo is a Great guy and knows what he is doing!
Originally Posted by PDViper77 (Post 11256303)
Nice setup!
Originally Posted by BOOM BOOM (Post 11256330)
nice...HOT NUTS..!!!!!!!!
Originally Posted by SPEED_NYC (Post 11256401)
Nice #'s and a super clean car!! very nice!
Originally Posted by Rotor_4_Life (Post 11256663)
Which seals are you using? Car looks and sounds awesome by the way :icon_tup:
Thank you! 2mm superseals

steeve2184 10-16-12 07:27 AM
Gorgeous. And it looks even better in action!

Rotor_4_Life 10-16-12 01:38 PM
Originally Posted by MR.45 (Post 11256694)

Thank you! 2mm superseals
No worries. Which brand of superseal if you don't mind me asking?

MR.45 10-16-12 02:36 PM
Originally Posted by Rotor_4_Life (Post 11257106)
No worries. Which brand of superseal if you don't mind me asking?
http://fuuu.us/154.png

Bacon 10-16-12 02:48 PM
Dont get it twisted, sintered iron is a RACING disk, not like the ACT 6 puck claims to be... but it still can be slipped on your way up to the lanes, and inch-ing the car forward... once it gets hot, its on/ off, I hate after i stop and get my time slip, it literally grabs like a launch and @ my 2k idle is annoying lol
But, it holds up and grabs BETTER the hotter it gets,
in a street car, it might be a little annoying, but thats the trade off

MR.45 10-16-12 03:06 PM
Originally Posted by Bacon (Post 11257164)
Dont get it twisted, sintered iron is a RACING disk, not like the ACT 6 puck claims to be... but it still can be slipped on your way up to the lanes, and inch-ing the car forward... once it gets hot, its on/ off, I hate after i stop and get my time slip, it literally grabs like a launch and @ my 2k idle is annoying lol
But, it holds up and grabs BETTER the hotter it gets,
in a street car, it might be a little annoying, but thats the trade off
lol nice. If it makes the times then that's cool with me. Ive never been one to complain about the comfort side affects of go fast parts anyways :)

sk8world 10-16-12 03:08 PM
Mine is very easy to street drive

prrex4ever 10-16-12 03:08 PM
Very nice car and set-up, congrats.


All times are GMT -5. The time now is 12:24 AM.
Page 1 of 3
1
2
3
Show 50 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands