IDRC 4-23-11 JPre racing Rx 3
http://www.youtube.com/watch?v=LwCi5xrDU88
Oh heres a video of my car at IDRC since no one seemed to mention anything about it. Even though so many people on this thread that was there, but neglected to mention anything about my car so props to me :) |
|
|
|
nice run's where u the only rotary there?
|
.
I got asked all day for your car and everyone said they wanted to see the engine and what specs....i told them i dont know go ask you and they just looked briefly around the car and left...... I told them a quick guess,from my point of view.....FD engine on e85 1/2 bridge or full 6 1600cc injectors,water to air with about 20-25 psi ish .....and i havent seen your engine yet.....am i pretty close or what....LOL Most of the new crowed are young so they dont know nothing about these setups....so i was just filling in the blank spots during the day for everyone.......You gotta show your car a bit more to be expose here and there mangg........ nice runs by the way.....heard the car from the finish line....and how the hell do you wheelie off the water box..... |
Originally Posted by Yellow Rx3
(Post 10589169)
http://www.youtube.com/watch?v=LwCi5xrDU88
Oh heres a video of my car at IDRC since no one seemed to mention anything about it. Even though so many people on this thread that was there, but neglected to mention anything about my car so props to me :) |
who was doing the limiter love in the second vid , good stuff that you got out and repped the rota :icon_tup:
What was the run down of the day for ya, no dramas, got what you expected :) |
Good to see you out there bro !! the car looks and sounds good .....maybe a tranny for next event? brake the piggy bank:nod: nothing but love bro !!
|
Congrats on the runs Jarnel, car looks and is running good. Now your at the point for a clutchless trans. Once you get one, you won't go back. :)
|
Originally Posted by rotorsport72
(Post 10589185)
nice run's where u the only rotary there?
Rene also with his drifter car. It was nice to see all new and old faces and friends. |
Originally Posted by 61620B
(Post 10589235)
.
I got asked all day for your car and everyone said they wanted to see the engine and what specs....i told them i dont know go ask you and they just looked briefly around the car and left...... I told them a quick guess,from my point of view.....FD engine on e85 1/2 bridge or full 6 1600cc injectors,water to air with about 20-25 psi ish .....and i havent seen your engine yet.....am i pretty close or what....LOL Most of the new crowed are young so they dont know nothing about these setups....so i was just filling in the blank spots during the day for everyone.......You gotta show your car a bit more to be expose here and there mangg........ nice runs by the way.....heard the car from the finish line....and how the hell do you wheelie off the water box..... |
Originally Posted by beefcake
(Post 10589621)
who was doing the limiter love in the second vid , good stuff that you got out and repped the rota :icon_tup:
What was the run down of the day for ya, no dramas, got what you expected :) |
you missed out bro. I told you Im coming back out. Hopefully October will be better. I hope all them old skool guys will be back out.
|
hahaha I told you man, as long as you don't take the aluminum cans in my neighborhood Ill be able to collect and get my trans... LOL Rene got a truck full already... I got to catch up... Nice seeing you though bro.. I hope next time all of us rotary guys be eating in the same plate. Honda anyone??? hehehe
|
Originally Posted by ultimatejay
(Post 10590527)
Congrats on the runs Jarnel, car looks and is running good. Now your at the point for a clutchless trans. Once you get one, you won't go back. :)
|
Sorry for the individual posting I am new to posting and replying. Thanks to all though and nice seeing you all at the track.....
|
Originally Posted by Yellow Rx3
(Post 10590880)
:scratch:Jay its Jonel, :lol: Its all good though... A lot call me different names. Good to see you out with the 12a hulk... The car Jay, not you.. :lol: Men you got some bad ass tranny...
Yeah, it was good seeing everyone, just wished more guys would show up with their cars. It was also hard to hang around and talk with everyone with all the classes they call up and stuff going on so sorry if I didn't get to chat much with everone. Hope to see you guys again at the next race. I will have my Honda eater machine ready. :) |
I got to say listening to Jonels and jays car in the water box was making me:drool:
next time my friends, enough with the talking ....I'll be ready |
Originally Posted by rotorious13b
(Post 10591098)
I got to say listening to Jonels and jays car in the water box was making me:drool:
next time my friends, enough with the talking ....I'll be ready |
Originally Posted by ultimatejay
(Post 10591067)
Oh sorry, Jomomma. :lol:
Yeah, it was good seeing everyone, just wished more guys would show up with their cars. It was also hard to hang around and talk with everyone with all the classes they call up and stuff going on so sorry if I didn't get to chat much with everone. Hope to see you guys again at the next race. I will have my Honda eater machine ready. :) Don't get to cocky, cause that will get you know where in life. Oh and you said the "track was not prepped right" that is the reason why you didn't make the time. I think it was prepped well enough cause them supra's and honda's with gang of horse power is making the time hooking their car to the track. So, without this respect to you, just work on your car and reaction time a little more better, than "MAKING STUPID EXCUSES"! This is the reason why a lot of people don't post here. Cause of people like you making stupid remarks.. Sorry Jay. I just have to say that to you. Just in case no one have told you about it yet. Peace out my rotary brother... :icon_tup: |
nice run jonel this is eric i am glad too see you are running good with car hopefully next race i will get my car out there and we will have more mazda out there.
|
i think it would be a good race for jonel and jay to race each other when jay gets his pport done.........let the games begin!
And then when you guys are done racing go down the ladder to race joe, santos,chris and then at the end maybe with all this good racing going out i will bring my Rx3 out to lay down the laws of physics......LOL |
Originally Posted by Yellow Rx3
(Post 10594524)
:icon_tdow No Gay, my name is jonel, I don't appreciate your stupid childish remarks. I don't even you know that were that close for you to be disrespecting me. I give people respect, I hope you be able to also.
Don't get to cocky, cause that will get you know where in life. Oh and you said the "track was not prepped right" that is the reason why you didn't make the time. I think it was prepped well enough cause them supra's and honda's with gang of horse power is making the time hooking their car to the track. So, without this respect to you, just work on your car and reaction time a little more better, than "MAKING STUPID EXCUSES"! This is the reason why a lot of people don't post here. Cause of people like you making stupid remarks.. Sorry Jay. I just have to say that to you. Just in case no one have told you about it yet. Peace out my rotary brother... :icon_tup: Regarding the track prep. I'm not trying to make excuses just showing facts. My 1/8th mile at Irwindale was 6.99 at 95mph with a 1.4 60ft. My best 1/8th mile at Fontana the other day was a 7.3 at 93.5mph with a 1.6 60ft. I made several tire pressure changes from 10psi all the way down to 9.0 with no great improvements. So you tell me why my times are so much slower since you know everything. Regardless of that, I am still very happy with my time of 11.4 since it is the fastest all motor 12a on the West coast and poss. East coast, and it's only a small bridgeport. What do I need to make excusses for? So sorry if you think I disrespected you, that was not my intention, but man seriously you need to lighten up bro. Your car still looks very good and I'll congradulate you again on your progress. Just need to practice shifting and you'll get your times really low. Hope to see you at the next event. Cheers, Jarrett |
Originally Posted by ultimatejay
(Post 10595406)
Wow! Hold your horses Jonel! First off my name is not Jay! My name is Jarrett but you don't see me getting my panties in a bundle over something stupid. Lighten up, I was joking around with you and if you can't see that then what can I say other than I'm sorry. I came over to you personally at the event and looked at your car and gave you a bunch of nice comments on how good your car looks and runs. I don't recall you doing the same but I don't really care. You come on here and post that no one made a video or talked about your car. Get over it dude and post your own thread. We all gave you good comments on your car so stop crying.
Regarding the track prep. I'm not trying to make excuses just showing facts. My 1/8th mile at Irwindale was 6.99 at 95mph with a 1.4 60ft. My best 1/8th mile at Fontana the other day was a 7.3 at 93.5mph with a 1.6 60ft. I made several tire pressure changes from 10psi all the way down to 9.0 with no great improvements. So you tell me why my times are so much slower since you know everything. Regardless of that, I am still very happy with my time of 11.4 since it is the fastest all motor 12a on the West coast and poss. East coast, and it's only a small bridgeport. What do I need to make excusses for? So sorry if you think I disrespected you, that was not my intention, but man seriously you need to lighten up bro. Your car still looks very good and I'll congradulate you again on your progress. Just need to practice shifting and you'll get your times really low. Hope to see you at the next event. Cheers, Jarrett Oh by the way I always came up to you and praised your car. Even before you knew I have a mazda. So good luck to you and your quest hope you get there in the next race.:icon_tup: |
All times are GMT -5. The time now is 03:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands