Help setting up all nitrous drag 13bt
I have been running a supercharger, with nitrous and was going to switch to turbo, but I would like to try an all nitrous drag car. I'm not trying for any records, just a fun drag car for the weekends. I'd be happy in the 11's
What I got... 1991 FC3S 13BT S4 street port 8.5 rotors, window bearings, atkins 2mm apex seals Jay-pro intake 4 inch cold air piping Auto-nomics TB and six 52 lb/min injectors Haltech E6x NOS wet kit (fogger nozzel, 10 lb tank) stock 88 TII trany Welded diff (NA, I have a TII sitting around but cann't seem to break this one) Struts, shock, sway bars ect I need to run two stages to get over 200 shot, was thinking of getting a plate setup for a carb, and running two 120 shots which would put me at about 300 wrhp, and then going up from there. Any ideas? FYI I'm ok blowing stuff up if I have fun doing it. |
Originally Posted by Supercharged FC
(Post 8425315)
I have been running a supercharger, with nitrous and was going to switch to turbo, but I would like to try an all nitrous drag car. I'm not trying for any records, just a fun drag car for the weekends. I'd be happy in the 11's
What I got... 1991 FC3S 13BT S4 street port 8.5 rotors, window bearings, atkins 2mm apex seals Jay-pro intake 4 inch cold air piping Auto-nomics TB and six 52 lb/min injectors Haltech E6x NOS wet kit (fogger nozzel, 10 lb tank) stock 88 TII trany Welded diff (NA, I have a TII sitting around but cann't seem to break this one) Struts, shock, sway bars ect I need to run two stages to get over 200 shot, was thinking of getting a plate setup for a carb, and running two 120 shots which would put me at about 300 wrhp, and then going up from there. Any ideas? FYI I'm ok blowing stuff up if I have fun doing it. go to a plate setup under a carb and no you dont need a two stage if your car is in the 2600-2700lb weight you will need 6.00 or higher gears with say a 26x8.5 tire. start with this. |
All times are GMT -5. The time now is 10:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands