Can I have it?
|
Can you tell us more about the tranny.
Anthony |
Re: Tranny
Originally Posted by 13B-RX3
(Post 7572768)
After three months of waiting it is back. I had the full face plate engagement mod done and got a new shifter (thanks for the advise on the shifter Chris!!!).
http://i49.photobucket.com/albums/f2.../miscbs001.jpg http://i49.photobucket.com/albums/f2.../miscbs002.jpg http://i49.photobucket.com/albums/f2.../miscbs003.jpg http://i49.photobucket.com/albums/f2.../miscbs004.jpg http://i49.photobucket.com/albums/f2.../miscbs005.jpg http://i49.photobucket.com/albums/f2.../miscbs006.jpg http://i49.photobucket.com/albums/f2.../miscbs007.jpg http://i49.photobucket.com/albums/f2.../miscbs008.jpg http://i49.photobucket.com/albums/f2.../miscbs009.jpg http://i49.photobucket.com/albums/f2.../miscbs011.jpg http://i49.photobucket.com/albums/f2.../miscbs012.jpg http://i49.photobucket.com/albums/f2.../miscbs013.jpg http://i49.photobucket.com/albums/f2.../miscbs014.jpg http://i49.photobucket.com/albums/f2.../miscbs015.jpg http://i49.photobucket.com/albums/f2.../miscbs016.jpg |
Nice John Deere. Ohh NewCastle! My Favorite! I'm so thirsty now!
Now put that sweet transmission in and get some vids of it in action! |
looks awsome
|
Originally Posted by AnthonyNYC
(Post 7573011)
Can you tell us more about the tranny.
Anthony |
Wow, that looks really nice and fast.
I like it, alOTT. |
what's the torque rating on it?
would it be a simple swap with a turbo 2 tranny from fd? sorry if it's a dumb question... |
nevermind i asked that haha
looks good tho. |
that looks like sex...
What kind of adapter or bellhousing do you use with this? |
That's great info, thanks for sharing.
Anthony
Originally Posted by 13B-RX3
(Post 7574072)
It is a Doug Nash 4+1. originally it is a pro shifted transmission but Liberty's transmission converts them to a face plate engagement. The transmission can be found for $750-$1000 and the conversion by it's self runs around $1100. I had a couple cracked gears, surface enhancement, and got a new shifter so it ended up running me $2500. If you had a nash that was in very good shape you could have as little as $2000 in a complete trans face plate and all. The cheapest trans that is comparable start off at $4500 so it's worth the wait.
|
Allen
That shifter is going to make a world of a difference. No more selecting two gears at the same time. You know there are a couple of little tricks that you can do to make that shit shift like a clutchless. The tranny can almost pass for a gen1 G-force but with Liberity style internals. Craig really does a nice job with any tranny he puts his hands on. He actually repairs and improves on most of the competitors offerings. |
Thanks Chris, that is actually one of the few components that i have spent that much money on and thought that i got more than i paid for. If it works half as good as it looks i will be very happy.
So, what are these tricks you speak of??? I was going to try and shift with the line lock/ two step button. Is there something else? They told me to run either 80 W 90 mineral or 75 W 140 synthetic. That seems awful thick. I have talked to several people who have run 4+1 in the past and they ran either ATF with STP or 30W motor oil. I was thinking of running Sincromax. Do you think that would hurt anything? It is a TII bellhousing and an adapter from G-Force. If i had it to do over again i would have just bought a mid plate from E&J that has a chevy bolt pattern then used a lakewood scatter shield. |
1 Attachment(s)
Originally Posted by 13B-RX3
(Post 7575729)
It is a TII bellhousing and an adapter from G-Force. If i had it to do over again i would have just bought a mid plate from E&J that has a chevy bolt pattern then used a lakewood scatter shield.
Hmmmmm, I never knew about this adapter. I like it. Soo, what do you do about a starter? I hoping it still uses the factory flywheel. |
Good choice.. a long shifter is the ONLY way to go.
|
Originally Posted by Doc Holiday
(Post 7575918)
Hmmmmm, I never knew about this adapter. I like it. Soo, what do you do about a starter? I hoping it still uses the factory flywheel.
|
Speaking of starters Chris. I am running a TII starter and had to shorten the 5/R lever to clear it. I have had several people tell me that a GSL-SE auto starter will work. I tried that but the bolt pattern was off. Is there another way to do it or an i screwed?
Thanks PS what about that shifting method???????????????? |
RE: chevy adapter with mazda starter
Originally Posted by crispeed
(Post 7576489)
Starter choice depend on flywheel used. The stock type flywheel would require the rear housing from an auto 13B REW/RE or 20B.
|
It looks great! Can't wait to hear about the results.
I just sent a stock tranny off to Liberty to get a basic rebuild and a few upgrades, nothing fancy like that though. |
Originally Posted by 13B-RX3
(Post 7576555)
Speaking of starters Chris. I am running a TII starter and had to shorten the 5/R lever to clear it. I have had several people tell me that a GSL-SE auto starter will work. I tried that but the bolt pattern was off. Is there another way to do it or an i screwed?
Thanks PS what about that shifting method???????????????? Did you ever think about running a auto instead ? |
Originally Posted by rotorholic
(Post 7577003)
Im running a chevy adapter/mid plate to mazda bolt pattern on my new project also using a mazda cosmo auto starter with a browell bellhousing, now the flywheel is the tricky part, it has the holes for the mazda counter weight, the mazda cosmo ring gear intalled and the correct offset so the starter works correctly and it will accept a dual or triple 7" pro stock clutch, if you use the chevy starter you will have major problems starting the engine, flaco has all these parts available, same parts he runs in the rx8
|
Originally Posted by 13B-RX3
(Post 7576555)
Speaking of starters Chris. I am running a TII starter and had to shorten the 5/R lever to clear it.
|
Originally Posted by crispeed
(Post 7577935)
Did the same also. It's the easiest method I believe.
Did anyone else notice how well he keeps dodging the shifting question???:lol::lol::lol: |
Originally Posted by Viking War Hammer
(Post 7577289)
I never asked you this but, did you originally build your donk with the intentions of running a certain class ?
Did you ever think about running a auto instead ? Not really. I just wanted something different. I like grabbing gears too much to put a auto in it. |
All times are GMT -5. The time now is 06:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands