what do I do about this (bodywork)
Here is my problem. I am trying to fill the dings on the car. No Big deal but there is rusing on the wheelwell edges. What do i do with that?? is there a write up on this. I really want to do this myself. I want dont want to be ghetto about it either. I want it to be durable Can someone help me?? There are friggen holes in the wheelwells.
http://www.importformance.com/miscim...t/DSCF0003.jpg http://www.importformance.com/miscim...t/DSCF0004.jpg http://www.importformance.com/miscim...t/DSCF0005.jpg http://www.importformance.com/miscim...t/DSCF0006.jpg http://www.importformance.com/miscim...t/DSCF0007.jpg |
1). bang it out as close as you can get it
2). Get a welder and fill them holes! :) 3). Grind the 'excess' weld down with a grinder 4). Get it smooth 5). fill with <1/16" of bondo preferable 6). paint that :) |
Greg, you're screwed!.... j/k well maybe... I had this same problem on my 87 sport waaaay back in the day. What I SHOULD have done is cut all the rust out of there (if you don't remove ALL the rust it WILL come back to haunt you, ask me how I know...) then bang out a little patch out of sheetmetal and weld it in there. Do a bunch of tack welds and then grind it down smooth and use very small abount of bondo to fill in the small imperfections. If you do all this right it will look factory.
Have fun! Cam |
Could get a flared fender kit for it.
|
All times are GMT -5. The time now is 01:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands