Rotary power goes 9.116@149.52
Congrats to ARI YALLON of Rotary Performance in Garland TX!
Ari ran a 9.116@149.52 in his FD,on 02/02/02 in Ennis Tx.:D :D :bigthumb: :bigthumb: |
I thought Ari was in the 8s already??:confused:
|
are we talking about the 'street' class car, or the back halved car here?
|
he is still in the street class.
is there anywhere where i can find specs/mods and info on his car?? |
BTW, congrats to Ari! :bigthumb:
|
What drag racing event was this???
|
Way to go, Ari. And thanks for the great customer service!:bigthumb:
|
Originally posted by JoeD he is still in the street class. is there anywhere where i can find specs/mods and info on his car?? either way, 9.62 to 9.11 is a big jump if this is the same car. Great time!! |
Anyone know where there's a video of this?
|
Damn if that run was made on street tires JESUS!!!!!!!!!!!
|
Originally posted by DELTA_Rotary Damn if that run was made on street tires JESUS!!!!!!!!!!! |
i was at the shop three weeks ago and the car still had the stock drivetrain.
|
Originally posted by bb454 i was at the shop three weeks ago and the car still had the stock drivetrain. |
WOW! What a jump in performance! To drop .5 and only pick up a few MPH is amazing! He must have some new suspension parts or tranny. He cut a 1.45 60' on the 9.6 run right? He must have gotten a 1.2 or close to go 9.11. Sounds like someone just left the street class and went to quick huh? No way he can run that setup in the street class! I'd be interested to see what he did differently;)
|
Re: Rotary power goes 9.116@149.52
Originally posted by MASRX13BREWST Congrats to ARI YALLON of Rotary Performance in Garland TX! Ari ran a 9.116@149.52 in his FD,on 02/02/02 in Ennis Tx.:D :D :bigthumb: :bigthumb: Brad |
Chris told me once that he ran like 8.9s w/ slicks and sequential transmission .... and that was a year ago.
|
The RP crew is probably the most upfront and professional people when it comes to Bidness (texan for bussiness) that i know of. From Sky and Vicki (who answers the phone) Rocky (who takes my orders, and suggest X-mas gifts to my grilfriend for her) Ari (who sat down and planned a motor for me.) and finally Chris, who to me has been a wealth of information. I give them MAD COOKIE PROPS. :patriot:
|
what are the specs on his car?? as i recall, he didn't have any outrageous shit done to his car. last time i checked it was just T-78 / aggressive street porting / haltec / 1.8 bar / suspension and rear end goodies....right??
anything else im missing?? i remember he was running mid-high 9s and still streetable. what about now?? streetable?? thanks. |
Originally posted by fastrotaries The RP crew is probably the most upfront and professional people when it comes to Bidness (texan for bussiness) that i know of. From Sky and Vicki (who answers the phone) Rocky (who takes my orders, and suggest X-mas gifts to my grilfriend for her) Ari (who sat down and planned a motor for me.) and finally Chris, who to me has been a wealth of information. I give them MAD COOKIE PROPS. :patriot: |
I think they have specs on their website www.rx7.com
The previous best run of 9.58 was with the stock transmission, but with drag slicks. I think his previous best with the stock tranny and street tires was like 9.92 or something? He could have run in 8's before with a sequential transmission, but that would put him out of the street class and into the outlaw class. |
I would think alot of people on this forum are close to what ARI has in his car (which is not much compared to the other street class cars). Anyone else in the 9's and low 10's on this board?
|
Last I saw Ari was using T88 with mucho boost and NOS. It wouldnt surpise me if he did go 9.11 cause adam did 8.9 on 26 x 10s also
|
Originally posted by Greg Last I saw Ari was using T88 with mucho boost and NOS. It wouldnt surpise me if he did go 9.11 cause adam did 8.9 on 26 x 10s also |
crazyness :bightumb:
|
8's on a 1.3L engine.... damn. That is hardcore. My Dad's 10 second car is a 528ci Hemi (and it scares the shit out of me when I'm driving it). That is some serious power/ci going on there. The 13b is like 87 or 88ci right?
|
All times are GMT -5. The time now is 12:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands