Racing Beat Street ported : Over ported ?
I need to keep this from becoming a bash thread on the shop that built my core.
I have a 13b street ported core. I was told the shop was great at motors but I think they over ported my core ? My understanding was they use the Racing Beat templet, but I didnt know they went past the templet and did a "custome " job. God knows why they do that, they are not experts at fluid mechanics. I seem to blow smoke only when I sit at idol and never more then 3 seconds worth . My oil consumption is normal but I only blow smoke when this happens. I understand oil is injected during the combustion cycle but is a possible overlap due to the porting being to large causing the oil accumlation ? The core holds vacume and boost great. I have under 10k on the core. Any ideas if overporting could cause this? |
if overported...the oil control ring will slide over the intake port and can drop oil.
http://www.rotaryengineillustrated.c...eardown/28.jpg you can see the oil track rides along the intake port, if they ported into that area you can have problems. |
All times are GMT -5. The time now is 06:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands