Anyone know a source for M12x1.5mm to 3 an fittings?
 

Hey guys,
Looking for a metric to an fitting for my turbo oil feed. I have searched jegs and summit racing but I have only been able to find a m12x1.5 to 4an.

Any suggestions?
Thanks

Earl's 9919BFH is a 14mm 1.5 pitch male to -4AN male adapter.
It can be used to attach an oil line directly to either the front side housing where the Mazda banjo bolt is, or to the end of the stock Mazda oil line.

It can do both because the 14mm male end also contains a female tapered compression fitting like the stock Mazda line from the turbo.

http://www.amstreetrod.com/9919BFAASR.php4

B

Seems no one understands you're looking for a -3 fitting. Earl's doesn't have one. Aeroquip, Goodridge, etc, etc. may but I doubt it.

Only thing I can think is to use a -4 female to -3 male adapter. Summit part number EAR-989443. ATP also sells something similar.

http://www.atpturbo.com/Merchant2/gr...TG-027_450.jpg

Perfect thank you, I was wondering why all these links still did not have the 3 an fitting... I didn't realize you could get adapters like that. Thanks again.