Another 13B re cosmo question
 

ok, i now have a black TII to swap the engine into, i was wondering what else i would need to make the swap complete. Tell me what else i need besides this below.
(1)Strong clutch perfer puck style this baby has crazy torque.
(2)Light weight flywheel or Fd flywheel.
(3)Engine mounts.
(4)Haltech E6k or, which ever Haltech system would work the best bang for the buck.
(5)And last but not least the 13B-TT re cosmo engine.....now could i get some help on what else i would need for this swap to be nice and complete:p:
Thanks ALOT!!!!:D

oh and i WILL be keeping the twin turbo's on if this is any help. I hear bad things about the twins but i will just have to see.
Thanks

you don't need a puck style disk a good spring hub will do the job you jest need allot of sprung hub pressure. so find a pressure plate with high ( 2700lbs should more then do the job if your staying with the stock setup)

ACT streetlight is good option or the findanza unit for a light flywheel.

have to either fabricate or I think FC3S.org's online shop has a kit you can buy

I have an E6X that I'm just setting up but the E6K has worked in the past. Microtech will work but you will need the TII harness 89-91 and a similar year CAS.

A tII tranny is your best choice as it will allow ou to keep the smae drive shaft and line up the engine mounts if you plan to make your own. Personally I was thinking of switching over the front cover and belt setup to an REW and use the hall effect timing setup of the REW, but it seems that less and less people are willing to answer questions now about stuff like that and questions about cosmo's ( I think most of the people that have them or worked on them have moved on from this board..)

1) its not much crazyier than the 13bt
2) yep
3) yep need those too
4) best bang for the buck is the stock s5 t2 efi, works great, and it fits.
5) keep the fc water pump, this lets you keep your hoses and radiator.