about fuel pressure regulator
Hey anyone on this forum installed a fuel pressure regulator on their own? Was it difficult to do? I like sx type.
|
I installed one a few weeks ago, it wasn't too bad (not too good either). It took patience but it's do-able. The biggest problem was that the regulator is held in by two phillips head screws that are about 4 inches from the fire wall. You'll have to use a little stumpy screw driver to get them out and they are in there tight as hell (I had a friend hold the screw driver in place while I turned it with some vice grips). If you have any specific questions just let me know.
|
Hey thanks, what type of regular did u use? Also where did u mounted in the engine bay? Also why didn't u removed the upper intake? Because too me it look impossible to get to the stock secondary fuel rail?
|
Fuel Regulator
I installed my AEM regulator myself. I mounted on the driverside shock tower where there was an extra 10mm bolt. I simply remove the old hoses where the fuel filter attaches to. Then I used steel braided hoses to connect the regulator.
|
I just used the factory part from mazda. I did have to remove the intake manafold, and just swaped the parts out once I managed to get the old one out. It's a pain even once you get the screws out. The rubber gasket on the regulator really holds it in there tight. Sorry it took so long to respond.
|
All times are GMT -5. The time now is 01:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands