13brew t04b injector sizing
would i be safe to run stock primaries with 1900cc secondaries on a single t04b setup? powerfc management. overkill i know, just wondering if id be able to adjust them down enough
|
Should be good. I wouldn't call it overkill.
Personally, I would mod the primary rail and put the 2ndaries in the primary spot for 2x 850cc & 2x 1900cc. I was running 85% duty cycle on 2x 720cc & 2x 1,600cc combo on my smaller HiFi compressor cover 57mm T04B @ 18psi. Maxed the duty cycle ~3,300rpm on my next 57mm turbo (EFR 7670 on high boost) and had to settle for 26psi. Then again, my engine likes to run really really rich for best power. |
Originally Posted by BLUE TII
(Post 11974335)
Should be good. I wouldn't call it overkill.
Personally, I would mod the primary rail and put the 2ndaries in the primary spot for 2x 850cc & 2x 1900cc. |
|
All times are GMT -5. The time now is 01:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands