13b Peripheral Video dyno pull
 

Just ran the EX IMSA RX7 Peripheral 13B on the dyno, and here is a link to
the video.
Unfortunately the ignition cut out at 6800 rpm, and we were not able to fix
it at the dyno shop.
We will be back next week we a proven ignition system.
Crank up the volume !!!

http://images.realride.com/cgi-bin/i...mv&img=&tt=avi


<ahref="http://images.realride.com/cgi-bin/imageFolio.cgi?action=view&link=Video&image=RX7-Dyno.wmv&img=&tt=avi">Video</a>

benny
Realride

O.O

Can't download the file, only streaming is allowed.

But ve haff vays around zat...

So anyway. What kind of torque numbers was it putting out, where did you start the pull from? (Sounds like went WOT around 3k?)

oOoo, i likey the noise!

It cut out at about 6500rpm and 185hp. Last time on the dyno we did 292hp at the wheel at 9400rpm, I comapre with the last dyno sheet and I right on schedule to achieve around the 280 to 290hp at teh wheel.
Thx
Benny

The pull is done in 3rd gear starting around 2500rpm

If you want to se the photos of the car her some link:

http://images.realride.com/cgi-bin/i.../Mazda-display

http://images.realride.com/cgi-bin/i...0Project_Benny

And here the story on the car
http://www.realride.com/news/viewnew...84723922,77189

realride.com

Hey benny that is a bad ass video.
I just get chills listening to a rotary roar.
Good luck on your car and post more vids.

Siiiiiick! :) Lovely Music To My Ears

Umm, awesome! But is that a strap being used next to the exhaust? If so, I think you need to throw a chain on that side instead.(see's flame hitting strap=car goes weewee where ever it wants)

It's the air/fuel ratoi sensor
Thx
ben

So very loud. Awesome. :D

Ok my bad, just looked too big for that.

kuuuuuuuuu so lovely!!!

It's now friday and the car is aslo ready to tomorow dyno pull.
will post the new result tomorow night.
Wish me luck !!

If you are going to post numbers please post numbers from various RPM points not just peak figures.

I'm interested to see what your engine does vs. what other peripheral port engines have done in the past.

New Numbers
 

I made a new post