Track Wheels, 18x10 +50 offset
 

Hey fellow track rats! I'm looking for some wheels that are 18x 10 +50 offset, 5-114.3 bolt pattern for my track only FD. I run 285/30 18's on all corners. I have 2-sets of Mustang knock-off wheels made by Replica but they are heavy as hell
and have alot of rotating mass. In my searches I have found some more Mustang type wheels that are of that size with a +48 offset (probably close enough). These
wheels weigh 24 lbs. That sounds pretty heavy to me. Any suggestions would be great. I would like to just bite the bullet and get a set of CCW's; but they don't suit
my low rent budget. What would be considered a good average wheel weight? I
would also consider some used CCW's if anyone has a set in the corner of the
garage. Road rash is not a problem; as long as they are straight and will balance.

Cheers!:icon_tup:

What's your budget?

24lbs for an 18x10 doesn't sound all that bad to me :scratch:

Corvettes/Camaros run that size/offset but you'd have to get a set in the right bolt pattern (easy to order with knock off wheels) or get a set re-drilled.

C5Z's are 18x10.5 and weigh 21lbs.

Not sure how "economical" that would be.

my Enkei RPF1s are 18x10.5 and 19 lbs... 24 isn't terrible.

Hey Pete,
The wheels I found +48 offset were $154.00 each. Thats' a far cry from $675.00
each for CCW's. I'm also going back to Kumho V 710's for my tires. The BFG R1's
take too long to heat up and don't have near the grip as the V 710's. You have a set
of CCW's?

I looked and looked at Enkei but couldn't find them with the +50 offset. I'll post up
the wheels I was considering. Cheers!

Matte Black Machined AMR Mustang Wheel 18x10 (05-14 All) at AmericanMuscle.com 28332 - Free Shipping!

These are the wheels I was considering.

SERIOUSLY.........LOL

You're driving a 150 mph open your wallet and get some forged aluminum wheels for christ sake hehe

Here are your track wheels you cheap old bastard :D: https://www.rx7club.com/ne-sale-want.../#post11439603

I never denied the cheap bastard part; but did you have to throw in the "old" shit?
LOL. I guess I am a grand dad x2, that prolly qualifies.:nod:

Hey brother it takes one to know one :lol:

PS I want my axles and spindles

These are aluminum BTW...HeHe

:nod:I'll bring em to the FSR event you cheap young bastard...

How are you able to run the 15 offset? Are you running 285/30's?
Thanks for your input.:icon_tup:

Enkei Wheels - Racing Series Wheels - RPF1


Fritz,
I pm'd the guy with the Enkei's on the forum; haven't heard back. Will a 9.5"
with a 45 offset still work with 285/30's?

I thought they were steel jk.... but are they cast spun forged put through blender and microwaved........i don't think so at 200 a pop :lol:

Seriously you should grab those RP01s at 500 that's a damn good deal.

I'd probably go 275 35

Hoosier R6

I have a widebody FC... I wasn't implying that you should buy a set, I was merely giving you a data point for how heavy a really light 18 was going to be.

Good deal. Thanks for responding. I just couldn't find the size I wanted in Enkei.
I was hoping I missed something. Cheers!