Took my FD to Willow spring Street this monday.and Did pretty good result
2 Attachment(s)
1:25.8.!! with passanger( I usually dont really take it hard when I carry passanger).
This should be fastest FD ever run in Street of willow. Did not find a best gear and line for this track yet. I basically use the gear selection and line from my Lotus 7. That car I did 1:25.1.... Incase you guys are wondering. Sport compact car recenly have two car run head to head in Street of willow. check out that issue for detail. I think my lap time can come even closer if I can dial the chssic right. I might need stiffer spring at back http://www.motorsportlens.com/promo/...8-08_Promo.jpg click the pic to watch the Video http://www.trackhq.com/forums/photop...18-SOW-Jay.jpg I was filming my friend's E36M3 at first 2 laps. he run about 1:28.xx My best lap when I Chase A Nissan S15 sec . My FD should be pretty easy to get it down to 1:24.xx if they are not traffic infront or watch the youtube http://www.youtube.com/watch?v=2D6GgjMT7m0 |
|
Good stuff! That's making me sad since I have snow and ice all around me right now. ;)
|
Very nice!
What are you running for spring rate and tires? |
Nice run. Looked like you had a decent amount of oversteer on corner exits though!
|
Originally Posted by kwerks
(Post 7897284)
Very nice!
What are you running for spring rate and tires? Some Quick Machine Spec 1993 MAZDA RX-7 Best lap time 1:25.8 Full inter HP:350WHP 10psi Suspension: Apexi N1 coilover. Custom made off set pillow ball bushing. 3 peace sway bar Front. Brake:Porsche Big Red Brake at front.R4 PADs. HAWK blue at rear DriveTrain:KAZZ LSD.4.3 final drive Aerodyamnic:Real RE Amemiya AD-GT fenders and side steap. with front and rear diffuser. GT2 Spoiler Wheels/Tire:BBS RGR 18x9.5 with 275/35/18 Nitto NT01 I build this car Fronm Ground up by my self. This is my first time Tracking my FD at this track and I did not track her for almost 3 yearrs. so take it semi hard only. but still get pretty good result I want it J For a reference Mine's 600HPover GTR did a 1:21.x Drive by Tsuchiya Keichi san(Drift king). so I should be happy about my home build machine !! :) I think if I do take my RX-7 out again. I will change Rear spring rate from 16KG to 18 KG. to help me rotate the car at corner exit. If you guys watch it closely. Is pretty hard for me to rotate the car at slow speed. this will incl the Turn 2. and Ski pad almost lift the Inside wheel. at Corner exit http://www.trackhq.com/forums/attach...5&d=1203484389 http://www.trackhq.com/forums/attach...8&d=1203484389 http://www.trackhq.com/forums/attach...9&d=1203484406 Some of other I took http://www.trackhq.com/forums/photop...hp/photo/12093 |
Great video, I love this picture!
http://i48.photobucket.com/albums/f2...n/IMG_3126.jpg |
Thats a wild spring rate! But w/e works...
Car looks great! Was the Mines GTR on R.comps too? regardless your lap time is pretty good. |
1 Attachment(s)
Originally Posted by kwerks
(Post 7899893)
Thats a wild spring rate! But w/e works...
Car looks great! Was the Mines GTR on R.comps too? regardless your lap time is pretty good. As the spring rate. before I upgrade all bushing to pillow ball. It does feel too bumpy due to the blinding on the stock rubber bushing. but with this pillow ball bushing set up. it feel pretty comfortable compare to before. but a bit noisy.... The Valving on the Apexi N1 is good. but it is not perfect yet. I am Strugle to want to change any set up on my FD.... cause I dont really want to track this car.. TOO $$$$ money to keep runing unless I get a sponser ;). and I already get tons of good pic :) this is one of reason I bring her out. cause I am short on the Auction shoot!!!! PS for any one want to Track their FD install A baffle plate in their oil pan or Accsump. cause on my Stack 8130 I can see the Oil psi warming light went on in bling a sec ( or less) in some of tide corner !!!!!!! https://www.rx7club.com/attachment.p...1&d=1203741493 |
What % does your Kazz LSD lock at?
|
Originally Posted by eoph
(Post 7902062)
What % does your Kazz LSD lock at?
MM Like i said this is my Street car, so I did not order any thing special. this shoul be stock KAZZ set up I also driving my friend daily drive FD(falken 615) for few laps , help him find the line and braking point..... I did a 1:31.xx ? consider this is faster then most of Stock EVO and STI I am pretty happy with result :) (will post data log system) his car have stock Torsen... dam that is pretty scary when you are on the limit. the momtemnt the insider looose traction . the car feel like slide on the ice. This momtemnet hardly notice able on Clutch type or Mazda Speed Torsen..... and the Apexi Street suspension......... is barely enought for Track drving [ |
I was wondering cause I've read the Kazz comes stock with a very high % lock, which could also be the problem to your understeer?
|
1 Attachment(s)
Originally Posted by eoph
(Post 7902185)
I was wondering cause I've read the Kazz comes stock with a very high % lock, which could also be the problem to your understeer?
|
very impressive. such a nice place to drive
|
I'd really like to know what is the brand of your hood, it looks quite awesome.
|
Your car looks amazing... you're using your car in good use!
Do you have higher resolution of this pic? http://www.trackhq.com/forums/attach...5&d=1203484389 |
I think its easier to stiffen with a bigger rear sway bar?
How are those front canards? Do they actually give any noticeable downforce? |
Very nice! Re. the oil level issue, how far are you filling it up?
|
sweet ride.
what system do you use to record the data acquisition and feed into the cameras? where did you get the caliper brackets to bolt up the porsche calipers? i had KAAZ on stock setting 100% lockup. on corner exit, it would understeer greatly because both wheels are turning at same time with same force. Take it out and adjust to 33% and it'll fix that. |
Btw the fourth pic you posted made it on the back of Grassroots Motorsports' latest issue as an advertisement for nittos :)
|
Your car looks amazing... you're using your car in good use! Do you have higher resolution of this pic? sorry higher resolution is for privite use.....
Originally Posted by eoph
(Post 7903993)
I think its easier to stiffen with a bigger rear sway bar?
How are those front canards? Do they actually give any noticeable downforce? Very nice! Re. the oil level issue, how far are you filling it up? sweet ride. what system do you use to record the data acquisition and feed into the cameras? where did you get the caliper brackets to bolt up the porsche calipers? i had KAAZ on stock setting 100% lockup. on corner exit, it would understeer greatly because both wheels are turning at same time with same force. Take it out and adjust to 33% and it'll fix that. Btw the fourth pic you posted made it on the back of Grassroots Motorsports' latest issue as an advertisement for nittos http://www.trackhq.com/forums/attach...4&d=1198110541 |
can you make me a set of those brackets?
|
2 Attachment(s)
The data file of me driving my Friend's Boost up FD.
255 Falken 615 Stock twin. Apexi "Street" coilover 1.31.6. in only 5 laps Pretty good for a Daily driver... Even with AC and Radio ;) http://www.trackhq.com/forums/photop...m/DSC06147.JPG https://www.rx7club.com/attachment.p...1&d=1204103547 https://www.rx7club.com/attachment.p...1&d=1204103547 |
All times are GMT -5. The time now is 04:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands