Spline count and axle size
 

Hey guys, I heed a little help here.
I'm about to order new Tilton clutchplates for my MFR tranny.

As the thread title says: what is the axle diameter and spline count?.

Measuring my allignment tool its, 23mm and 22splines. Only problem is that i can't seem to find that size anywhere.

Its a dual 7 1/4" assembly.

Thanks
-Kim

Nevermind, I actually went and measured the axle on the gearbox, its 24mm with 22 teeths/splines

Bump .

Today I recieved an e-mail from Tilton, they claim that Rx-7 shaft size is 1" x 22 splines,

Someone please confirm this!!!

Same input shaft size as an FC turbo / FD?
It should be 1" x 23. :(


-Ted

^^ K thanks, but I guess that Turbo and FD's has one more spline than 'NA's.
I counted several times, its 22.

Non-turbo uses 1" x 22 clutches, Turbo II and FD uses 1" x 23 clutches.

You sure about the non-turbo part?
I swear it was 7/8". :(


-Ted

Reference: Mazda 1997 Competition Parts Catalog, page CF-10, Tilton Clutch Replacement Parts

Clutch Pack 5 1/2" Various: (1"x22) TL Part #64140-0-AA-29
Clutch Pack 5 1/2" 13B T & TT: (1"x23) TL Part #64140-0-AA-30
Clutch Pack 7 1/4" Various: (1"x22) TL Part #64185-0-AA-29
Clutch Pack 7 1/4" 13B T & TT: (1"x23) TL Part #64185-0-AA-30

See also the note at the top of the page stating that the Tilton clutch/flywheel assembly (0000-02-9001-TL) is "Designed for Non-Turbo rotaries with 1"x22 spline size and ring gear tooth count of 116".

http://www.mazdamotorsports.com/weba...d=-1#catalog97

Nearly, actually it's 15/16" ( just fitted one this week to my 1st gen).
See http://www.tiltonracing.com/content....st2&id=107&m=d

^^ hmm thats odd, the 1" I bought was a pretty snug fit, could hardly get it on the shaft. :scratch: