RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Race Car Tech (https://www.rx7club.com/race-car-tech-103/)
-   -   Selling Race car. :( (https://www.rx7club.com/race-car-tech-103/selling-race-car-490394/)

speeddemon32 12-12-05 06:41 PM

Selling Race car. :(
 
I posted this in the for sell section, but i figured it should be here in the race car section to.



I have a 2nd gen drag car...... or what is ALMOST a drag car, that I am considering selling.

the extreamly long story made extreamly short, is that I turned my daily driver into what you see today. I took the car and removed everything down to a rolling chasis, converted the drive train to TII, caged the car, and added a bridge port engine to it.

after working on this car for years, and spending more money then I should have, the car just will not run correctly (it will not rev past ~6,000 RPM's). I know it's going to be something stupid like a distributor, or bad coils or somehting like that, but for now, I am just sick of working on it.

the car is running a holley carb, with a 4 port 13B Bridge engine. more details can be found here. http://groups.msn.com/ROTORLUTIONRacing the car really is nice, and looks great in person.

I do not have a price as the car is NOT for sell yet. I am just toying with the idea of selling it as I am tired of working on it. There is a lot more to the story but for now I am just trying to see if there is itrest in it.


oh yeah, so that I dont get a bunch of people asking me why I dont just try replaceing the coils, or the dizzy....... I have already. in fact I tried replacing the coils, dizzy, engine, plugs, wires, carbs, MSD's.... ect.

I am to the point that I either sell it, (I also have an RX-8 to spend money on) or take it to a rotary shop and drop it off and say "you figure out what is wrong with it"


for those of you that dont want to click the link, here is a list of stuff on the car.

Weight Reduction Down to 2100 Pounds
Roll Cage by Schideker Fabrications
Sheet Metal by Schideker Fabrications, and home built
Ultra Shield Aluminum Racing Seat
RCI 5 Point Harness
Auto Meter 10,000 RPM Tach with shift light
Auto Meter Oil Pressure Gauge
Auto Meter Water Temp Gauge
Auto Meter Vacume Gauge
Racing Beat Intake Manifold
Holly XXXCFM Carb (our secret sorry)
Bridge Ported 13B 4 port Engine
Quick release steering wheel
5 Gallon Fuel Cell
Billet Aluminum 140 GPH @ 18 PSI Fuel Pump
Billet Aluminum 5-12 PSI Adjustable Fuel Pressure Regulator
Lexan Windows on the 2 sides
Pacesetter Header
3" Custom Exhaust
12A Distributor
MSD didgital 6 plus
3 MSD blaster 2 coils
Acell 8mm Spark Plug Wires
Racing Beat Solid Hub 6 Puck TII Clutch
TII Tranny
TII Driveshaft
TII Rear End
Drive Shaft Safety Loop
Good Year 8x27x15 Racing Slicks on Drag Racing Wheels
Adjustable Coil over rear suspension




anyone know what it would be worth?

DamonB 12-13-05 06:56 AM


Originally Posted by speeddemon32
I have a 2nd gen drag car...... or what is ALMOST a drag car, that I am considering selling.


If your car is not for sale there is no reason to post a thread trying to sell it.


All times are GMT -5. The time now is 10:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands