RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Race Car Tech (https://www.rx7club.com/race-car-tech-103/)
-   -   Reasonably priced FC Widebody options? (https://www.rx7club.com/race-car-tech-103/reasonably-priced-fc-widebody-options-571991/)

TrentO 08-25-06 02:55 PM

Reasonably priced FC Widebody options?
 
Hi all. I've been trying to get a Tri-point engineering FC widebody kit for the last while without luck. After a few phone calls and non-returned E-mails I've given up on them. Are there any other widebody options out there at a reasonable cost?

-Trent

speedturn 08-25-06 09:15 PM

Try Japco; they have reasonable priced race car fiberglas panels for 1st & 2nd Gen RX-7s

http://www.piner.com/japco/prices.htm

photopaintball 08-25-06 10:33 PM

I had the coolest idea today while i was checking out an old supra.

80's supra fender flares!

like so
http://cgi.ebay.com/ebaymotors/1982-...QQcmdZViewItem

it would be good for 2 inches I think.

KeloidJonesJr. 08-25-06 10:54 PM

Mariah!!!

Black91n/a 08-25-06 11:55 PM

Mariah is expensive, he said reasonably priced. There's often wide fenders on eBay.

owen is fat 08-26-06 07:47 AM

www.raceonusa.com makes tripoint replica fenders, they used to have them on ebay and on their site but I dont know if they stopped making them, your best bet is to call them directly. I have their front fenders and a friend of mine has both front and rear from them along with the RE2000 front bumper from them.

the other option is the 50mm rear flares from version select (I think?).

Mariah's customer service sucks and a friend of mine got their front fenders and the fiberglass/filler was garbage on them.

AWR makes widebody panels but they are not cheap... they are available thru AWR and MazdaCompetiton.

SupraMikesRX7 08-26-06 12:47 PM


Originally Posted by speedturn
Try Japco; they have reasonable priced race car fiberglas panels for 1st & 2nd Gen RX-7s

http://www.piner.com/japco/prices.htm

Any pictures of the japco kit? I saw the one on his site but it's not very detailed...

cpa7man 08-27-06 01:15 PM


Originally Posted by speedturn
Try Japco; they have reasonable priced race car fiberglas panels for 1st & 2nd Gen RX-7s

http://www.piner.com/japco/prices.htm

Not bad at all, anyone have any experience with mounting ease and fit/finish? Price is reasonable and they look great in the pictures.

I've only run the ones from iscracing.net and now I have a full set of custom pieces made by a fellow racer.

jgrewe 08-28-06 08:52 AM

Even though this is posted in the race section I have to ask, Are you looking for race quality parts or street quality parts? If you want race stuff PM me, I share a shop with a guy that has molds for the four corners, hood,and hatch or 'vert deck lid. You'll probably have a bunch for shipping from anybody so keep that in mind.

RX-Heven 08-28-06 10:53 AM

My custom widebody is being replicated in a very small batch. Definately the widest out there.
https://www.rx7club.com/forum/showthread.php?t=480742


All times are GMT -5. The time now is 03:59 PM.


© 2024 MH Sub I, LLC dba Internet Brands