Race Timming
Hey guys -- Can you give me where I should set the timming on and IT-7 car....
|
|
It needs to be set on the dyno if you really care about horsepower.
If you can't get it on the dyno, then set leading to 29-30 (but no more!) and trailing as far advanced as it will go, typically about 15. The entire Paul Yaw website should be required reading for IT-7 but he is being conservative - 24 degrees advance is not enough for best power. Steven |
Chris Ludwig has a nice post on IT.com about timing:
http://www.improvedtouring.com/forum...advance+timing Basically the consensus is that the dyno will provide the answer. Start near stock, work up to max power verifying AFR as you go. |
I am using the center mark on the pully right.... yellow black red .... I use the black one... right? What are the yellow and red? Thanks -
|
All times are GMT -5. The time now is 11:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands