Kirkey in FC
 

I recently bought a dedicated track FC and needed a slightly larger seat to replace the Corbeau Clubman that the prior owner had installed. I got up a Kirkey Intermediate 20 degree for this purpose. I'm also planning on on installing a seat back brace, probably the IOPort.

Does anyone have any recommendations on the best way to attach this to the car? I'm probably going to have to bolt it as close to the floor as possible to give me enough headroom.

The interior is gutted and it has what looks like an Autopower rollbar.

Thanks in advance,

-bill

try using 3/8 steel plate on under side of floor board. you might also need to cut any ridges that stick up from floof, then you can make a strap washer + 2 and use grade 5 bolts. when cover is instaled you wont know its there.