Brake Setup on my Race Car
In case you missed it in the 3rd gen forums:
https://www.rx7club.com/forum/showthread.php?t=723283 |
Good info, thanks.
|
Good stuff Damian. Your setup is very similar to mine in terms of the dual master cylinders + balance bar. I love the sensor and gauge idea though for bias, I'll have to copy you on that - I think I can just connect 2 more pressure gauges to my AIM MXL and achieve the same thing!
EDIT: I am about to install some 200CFM 3" fans into my brake ducts on either side. Will be interesting to see the effect they have on brake cooling... |
>>Good stuff Damian. Your setup is very similar to mine in terms of the dual master cylinders + balance bar.
nice...i just checked out some pics of it on ur site, very nice setup. >>- I think I can just connect 2 more pressure gauges to my AIM MXL and achieve the same thing! Great idea. >>EDIT: I am about to install some 200CFM 3" fans into my brake ducts on either side. Will be interesting to see the effect they have on brake cooling... Well, i know that currently i dont need them, i usualy have the other issue, i need to block some of the duct to get the brake pad temp to what it needs to be since the sytem is working so well now...for the fronts that is. |
Originally Posted by damian
(Post 7822966)
>>EDIT: I am about to install some 200CFM 3" fans into my brake ducts on either side. Will be interesting to see the effect they have on brake cooling...
Well, i know that currently i dont need them, i usualy have the other issue, i need to block some of the duct to get the brake pad temp to what it needs to be since the sytem is working so well now...for the fronts that is. |
All times are GMT -5. The time now is 07:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands