Bolt-on manual rack in development (Tired of looking for an atomicrex rack?)
 

I spent the last two months working with a chassis shop to develop this bolt in power rack replacement. I have to have the inner tie rods that come with the rack cut down and rethreaded to fit the FD, so that is taking place right now. I have an initial 10 racks available, and I am taking deposits on them for anyone interested. These should be ready to ship mid-end October.

The rack itself is only 13lbs! It should save you around 25lbs over the factory power pump/rack setup. This rack will give you a quicker ratio 14:1 (stock is 16.6:1), and has a tighter turning radius than factory.

This is a 100% bolt in kit, uses the factory mounting location, and I have the inner tie rods machined and threaded to fit the stock outer tie rod ends. This makes for a super easy swap!

There are more specs here:
Mazda RX-7 Manual Steering Rack FD3S - Deposit only | Grannas Racing

Here are some pictures of the setup:

The rack installed:
https://cdn.shopify.com/s/files/1/09...g?v=1443711545

The mount kit:
https://cdn.shopify.com/s/files/1/09...g?v=1443711570

The mount installed:
https://cdn.shopify.com/s/files/1/09...g?v=1443711545

When at full lock:
https://cdn.shopify.com/s/files/1/09...g?v=1443711545

PM me for details!