Thinking about ordering from SR Motorsports/Shane Racing/Ray Lochhead? Read this 1st!
I'll let you draw your own conclusions read, page 2 and 3:
https://www.rx7club.com/showthread.p...7&page=2&pp=15 |
pretty shady ass stuff
the paint looks garbage and the cheap ass mazdaspeed sticker aint fooling anyone |
man you dont let shit get by, do ya.. he looks guilty, im goint to call him tomorrow.. i know ray, this dosnt seem like something he would do, but then, you never know!!
|
Originally Posted by 680RWHP12A
he looks guilty
|
Originally Posted by 680RWHP12A
man you dont let shit get by, do ya.. he looks guilty, im goint to call him tomorrow.. i know ray, this dosnt seem like something he would do, but then, you never know!!
|
|
Good GOD what a bunch of BS.
My only experience with them, a customer brought me their flywheel and clutch setup about 3 or 4 years ago to install into a 2nd gen NA. I bolt it all in and the clutch won't release at all, as if I'm trying to get into gear without touching the pedal. Took it back apart and found that part of the ACT pressureplate was rubbing/binding on the SR flywheel. Since we know ACT plates work perfectly on stock flywheels, and all OTHER aftermarket flywheels, we can deduce that the problem lies with the SR flywheel itself. I wound up having to grind the flywheel in 3 spots to clear the springs on the pressureplate. Obviously I had to do the R&R job twice, but only got paid for doing it once. I have read of several others having this issue with the SR flywheel as well. Damn, and people on this forum try to act like I am screwing people by building budget rebuilds with used housings (and them knowing that up front) meanwhile there is shit like this going on. :ugh2: |
Originally Posted by GoodfellaFD3S
Here ya go, have fun reading:
https://www.rx7club.com/showthread.p...t=shane+racing and https://www.rx7club.com/showthread.p...t=shane+racing and https://www.rx7club.com/showthread.p...t=shane+racing and https://www.rx7club.com/showthread.p...t=shane+racing From link #2
Originally Posted by rx7will
My friend bought his ultimate radiator for his fd. It was nice till we realized it was just the koyo radiator that he marked up. He even shipped it in a koyo box that was fliped inside out.
|
Horrible man! Just...horrible.
|
This is, quite sad. I got stainless brake lines and 4.33 final drive gears from SR a few years ago. Didn't have a problem then. I guess this will be keeping me away from them from now on.
|
What a piece of shit. I dont understand how people can act that way.
He needs a good long beating IMO. |
Bumping this up since I hope no one else has to get taken by Ray like I did. IF you call him 680rwhp12A, post his response to the painted red PPF....I'm sure he'll have a great excuse for us. Bad thing is, think of his mind set if he had gotten away with it. What dick and he deserves any and all bad karma he gets.
Tim |
A number of years ago, he was one of the few guys drag racing a FD. He was one of the "professionals" and had lots of magazine coverage.
He then decided to retire the FD and build a RX-8 to race. Strangely...I never saw an RX-8 built by him. So either he didn't have the money to build a RX-8, or he decided against doing so (as racing is expensive). |
Originally Posted by Tim Benton
Bumping this up since I hope no one else has to get taken by Ray like I did. IF you call him 680rwhp12A, post his response to the painted red PPF....I'm sure he'll have a great excuse for us. Bad thing is, think of his mind set if he had gotten away with it. What dick and he deserves any and all bad karma he gets.
Tim |
Agreed James and I hope this keeps a few others from getting screwed...thanks for starting the post Rich.
Tim |
bump!
|
I don't know Ray Lockheed (sp?) personally but HAVE had him recommended to me by someone I consider very knowledgeable. If all this is true, it sounds like a once-good man went slightly south on us.
|
Hmmm.......now I'm concerned. I had to get a replacement friction disc about a month ago for my SR flywheel, so I picked up a high flow fuel pump also. Since they look the same, he could have easily sold me the less expensive std. flow pump.
|
Thanks Guys! i'm new to the FD scene (about 2 years) and up in canada, everything is mail order, so i had just come accross his website and was going to order a bunch of stuff because it seemed on the level.
+1 for Goodfella's and for the community. Keep us updated if he "Re-brands" in the near future. |
I almost bought some of his shit.
Looks like my money is going elsewhere. |
Bump for some more exposure!
|
Rich, you remember my post about his Differential mount set that is relabled the "SR Motorsports drag launch kit" and marked up 200 dollars over Mazdatrix.
Bullshit. They didn't even return my emails or phone calls about it. I'll never do buisness with them again and recommend anyone else not to do buisness with them either. |
You know what's funny is that I have a bunch of pictures I took of a real MazdaSpeed powerplant frame that I took just because of this thread. Yeah, that one they're selling, not so much legit.
|
Some more great reading that further demonstrates what a lowlife this guy is, courtesy of rotormotor2:
http://forums.rotarytuner.com/showthread.php?t=7018 |
I'm surprised somebody hasn't gone to have a gentle talk with the man.
|
All times are GMT -5. The time now is 10:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands