PFC with ID2000 secondaries
 

Tried to search but not always easy to find and use correct search words.

Can anyone tell me the correct settings for ID2000 secondarys?

How should it be in the injector setup.

The car is going to run stock 550 pri injectors. So need to get it correct for the fuel.

Any input is apriciated.

Thanks
Jan-Tore

Go to the ID site and download the lag table then change the table.

Does anyone have verified numbers for this? Seems like at this point, searching through IDs site wouldn't be necessary.

Nobody has numbers for this?

I would have thought this would be an easy question.

Wow, this is a helpful forum.

I recall when I upgraded to 1300 secondaries years ago, I just went in to the commander and changed numbers on a couple injector settings.

Is this still possible for ID2000s? If so, what's the proceedure/numbers?

Settings 5 tab

InSc lag (ms) vs bat V

16V-.376
14V-.496
12V-.680
10V-.952
8V-1.456
6V-2.200

Q Secondary is 2200

Ive been using 26% transistion and .1ms.

Nobody answered because its been answered. Should get ahold of Arghx and get in the yahoo tuning group for the power fc. Very helpful info there.

Some info is hard to find, even on the www.
ID lag values are easiler to get from their site.

Initiative is the active word here.

Thanks needed this also