RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Power FC Forum (https://www.rx7club.com/power-fc-forum-47/)
-   -   Power FC Need Map. stock port, t04z, 550/1600 combo. (https://www.rx7club.com/power-fc-forum-47/need-map-stock-port-t04z-550-1600-combo-1072277/)

rotary△regime 09-30-14 11:28 AM

Need Map. stock port, t04z, 550/1600 combo.
 
I will pay for a map. Stock pump with a 550/1600 injector combo. Tuned a car with this setup? Have a good running car with this setup? understand nobody wants to be responsible if i burn up a motor. I get it. This is just to get a good start. And i will not hold you responsible if something goes wrong. Paypal ready. I know this is a common setup someone has got to have a good map.

cewrx7r1 10-01-14 11:44 AM

My 13b-REW engine has blue printed intake and exhaust ports, with a slightly modified TB.
Stock 550 primaries, and Bosch 1600 secondaries driven by a low impedance driver.
It has a Koyo "N" pass radiator and Blitz FMIC.

For the stock 2 bar map sensor, I have a map at 40psi base fuel pressure for running up to 16 psi boost on gas.

For the Apexi 3 bar map sensor(current setup) , I have a map at 50 psi base pressure for running up to 16psi on gas, and water/meth at 18 psi.

The turbo is a GT3582R.

PM me and lets talk by email.


All times are GMT -5. The time now is 04:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands