Power FC PLX SM-AFR to Datalogit
09-18-07, 08:08 PM
#1
Full Member
Thread Starter
Join Date: May 2007
Location: boise, id
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
PLX SM-AFR to Datalogit
I'm trying to figure out how to physically connect the PLX SM-AFR to the Datalogit.
I've tried to hookup the 0-5v to AN0 and Ground AN1 but didn't work.
I've searched but only find info about the innovative system.
Any help would be appreciated.
I've tried to hookup the 0-5v to AN0 and Ground AN1 but didn't work.
I've searched but only find info about the innovative system.
Any help would be appreciated.
09-18-07, 10:52 PM
#2
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 113 Likes
on
66 Posts
You must have the black box as the beige does not have a AN0.
Look at the AUX setup menu. Mine has AN1-AN2 as one of the options when wanting to input the O2 voltage as a delta function. That would mean the 5V goes to AN1 and ground to AN2.
Have you tried it in more than one configuration?
Look at the AUX setup menu. Mine has AN1-AN2 as one of the options when wanting to input the O2 voltage as a delta function. That would mean the 5V goes to AN1 and ground to AN2.
Have you tried it in more than one configuration?
09-19-07, 05:57 PM
#3
Full Member
Thread Starter
Join Date: May 2007
Location: boise, id
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the quick response cewrx7r1,
You are right, I have the black datalogit. It turns out that the problem was a bad ground (as always).
On another note, after doing some more searches it seems you are "the Man" when it comes to the PowerFC. I wouldn't mind paying you if you could review my datalogit file for my car. I just bought the car a couple of months ago and I want to make sure the settings are correct.
You are right, I have the black datalogit. It turns out that the problem was a bad ground (as always).
On another note, after doing some more searches it seems you are "the Man" when it comes to the PowerFC. I wouldn't mind paying you if you could review my datalogit file for my car. I just bought the car a couple of months ago and I want to make sure the settings are correct.
09-19-07, 09:27 PM
#4
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 113 Likes
on
66 Posts
On another note, after doing some more searches it seems you are "the Man" when it comes to the PowerFC. I wouldn't mind paying you if you could review my datalogit file for my car. I just bought the car a couple of months ago and I want to make sure the settings are correct.
