injector setup in PFC
I'm going from the stock setup to bosch 1600 sec with resistors and using the old 850 secs in the pri. What numbers should I use for injector setup in the PFC? I'm not quite sure of the lag on the 1600s. Thanks in advance for any help you can give.
|
Start with a lag of about 10 to 20. A search might show this as many have done it before and have posted here.
The instruction manual tells how to change the values for injector sizes. You really will need a datalogit to change some transition parms for smoothe transition from primary to secondary injectors. |
thanks. but I was wondering if anyone who is useing the same setup could give me their #'s for a starting point. I got the sec injs and rail from Keith.
|
All times are GMT -5. The time now is 03:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands