gone single turbo
 

i have been searching around for a while, but cant seem to find what im looking for.

my question is, i have gone from basically stock (full exhaust, intake, and tune) to single turbo, do i need to change any settings in the pfc? i plan to get it tuned next weekend, but want to drive the car to the dyno and do it safely. im using the stock primaries(cleaned) and 1680s. do i need to change anything so the pfc doesnt flip out when all the sequential solenoids are suddenly not there? i also removed all emissions except for the isc valve(not really emissions)

sorry if this has been asked 1000 times, but i cant seem to find it.

thanks

Some of the needed changes require a datalogit such as the 1680 secondary injectors. From your questions I can determine that you know little about what needs to be done.

Thus the answer is very simple. DO NOT DRIVE ON BOOST OVER 3 PSI. You can drive the car easily like this to have it tuned.