Apexi Power FC Pin Schematic
 

I've searched several forums with no luck---Anyone know where I can find a schematic for the Power FC?

I can look at the connectors on my wiring harness and back into what each pin does but am uncomfortable doing it this way.

you didn't search far away man... just look at the Power FC Installation sticky thread on the top of the power fc forum.

Max

Apexi Power FC "Schematic"
 

What I'm looking for is a "schematic" similiar to the one in the RX7 manual.
All I can find anywhere is a picture of the plug in connector on the ECU showing which wires to clip. I want to know what each input pin controls---No documentation in the Power FC instructions illustrate this (that I can find).

aren't they the same as the rx7 manual?

The connectors may look the same but the various inputs / outputs must be different (I think) as this ECU is not controlling many of the solenoids the stocker controls; EGR, pre-spool, relief valve 1 &2, charge control, waste gate etc...

Taking this on a different direction, can anyone direct me to a certified Apexi dealer / technician. I'm willing to pay to get this information.

All the wiring to the PowerFC is identical to the stock layout - just ignore the 4 wires that are cut, that's it. That's why you can plug the PowerFC straight into the stock harness and it works.

Section F of the shop manual has the ECU pinouts and outputs documented to death.

Dale