RX7Club.com - Mazda RX7 Forum - Power FC AP engineering e fan

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- Power FC Forum (https://www.rx7club.com/power-fc-forum-47/)

- - Power FC AP engineering e fan (https://www.rx7club.com/power-fc-forum-47/ap-engineering-e-fan-1129901/)

atsugiT2

09-12-18 10:06 PM

AP engineering e fan

Hello,

since im doing a bunch of other stuff to the car right now, im looking at ditching the stock fan/ shroud and swapping in an e fan. More than likely itll be the 2 stage fan from the 90s nissan quests..

but anyway, i know on the banzai adapter kit, they went thru the trouble of making the diagnostic cable available for use, but im not familiar with the ap engineerings wiring, so what would i have to do to run this fan on my car?
thanks,
carrington

Banzai-Racing

09-13-18 07:24 AM

AP did not have the option, you would need to add a wire to the ECU connector

atsugiT2

09-15-18 11:25 AM

Quote:

Originally Posted by Banzai-Racing (Post 12300651)

AP did not have the option, you would need to add a wire to the ECU connector

would you be able to point me towards the pin i should be adding this wire to? I cant find a wiring diagram for the ap engineering unit.. after throwing that wire on, would i just follow your procedure for the rest?

Banzai-Racing

09-17-18 12:23 PM

Same wiring as the FD. It is pin 3D, but you would not be connected to the diagnostic connector, you would just run it to the relay.

All times are GMT -5. The time now is 01:22 AM.