Where to buy and how much?

I sent you a PM

i installed one of these the other day. relocated it to the intercooler piping (just before the elbow).

definitely noticed more response on the PFC.

http://carphotos.cardomain.com/ride_...0345_large.jpg

http://carphotos.cardomain.com/ride_...0346_large.jpg

http://carphotos.cardomain.com/ride_...0347_large.jpg

http://carphotos.cardomain.com/ride_...0348_large.jpg

i think i'm gonna weld a nut onto the pipe so it has a stronger mount. the pipe is kind of thin, but it is sealed pretty well right now.

cheers :)

Looks good man

I installed mine in the factory 2nd gen location (TB elbow close to the throttle plates). I actually didn't have to cut up the factory harness at all. The plug for the factory FC IAT sensor uses two mini spade terminals. So I just crimped spades on to the connector pigtail and plugged it into the harness, just like how I had my FD IAT sensor installed.

I haven't gotten to run the car yet though as I was doing a bunch of interior restoration.

Yeah I actually started making these nice lil harness' for them that plugs directly into the stock FD wiring. Now it's a true plug n' play setup.

http://i10.photobucket.com/albums/a1...n/DSC01121.jpg

Plugged into stock FD IAT connector.

http://i10.photobucket.com/albums/a1...n/DSC01122.jpg

Further testing of this sensor here:
https://www.rx7club.com/showthread.p...92#post9739392

Arise!
 

Arghx,

Did you have to rethread the stock location to get the FD IAT sensor to fit? How about the other one? Thanks.

B

Yes, the thread is M10 x 1.25 for both

I would be interested in a sensor and wire, advise.

http://www.wannaspeed.com/index.php?...roducts_id=180

There you go. Make sure you add the pigtail option for true plug and play.

-AzEKnightz

They appear to be sold out, you can get them on eBay http://item.mobileweb.ebay.co.uk/vie...id=34083601562 I have bought from this guy in the past with no problems.
Or get it from a triumph dealer which is what I did.

I ordered one from a Triumph dealer. PN T1290510 It looks a little different, the body is black and the brass goes all the way past the sensor tip with four holes drilled around the circumfrance of the tube aligned with the sensor tip. seems good for protection of the tip.
Probably from an optional OE supplier. It looks fine. I'll will a a quick test to verify reading.

So where is everyone sourcing these from now?

I spoke to Travis at Mossy Creek Cycle. He's going to try carrying one in stock for us. Assuming that it sells, he'll continue to stock it. Seems like a good place to do business ... very helpful on the phone.

http://www.qualitycycleparts.com/T12...p/t1290510.htm


Now, being that I'm not in a hurry (translation I'm cheap) and couldn't find this in stock anywhere I have this on back order:
http://www.bikebandit.com/search?dsN...1290510%7c3%7c

Ebay shows some sensors but I don't know if they will fit or have the right resistance to temp curve:
http://www.ebay.com/sch/i.html?_nkw=...at=0&_from=R40


Are there other options?

PM Driftinjim
I got mine and the pig tail adapter from him

Does anyone know when wiring these things up if polarity matters? I recently installed one and my temps are all over the place. Its 90 degrees out and my PFC is bouncing between -13c to 50c... I am just hoping the connection I made came loose.

polarity doesn't matter. you've got some
thing else going on

For those who want to learn, here is a starter:

http://en.wikipedia.org/wiki/Thermistor

Thanks, I thought that was the case but I wasnt sure. Thanks for the link aswell!

It was a faulty connection, just to follow up.

learning

So where is everybody getting these now? Does wannaspeed not make the adapter for it either anymore?

thewird

See post #39. Bike Bandit came through for me but it took about three weeks. Mosey Creek Cycle has them in stock for about $10 more.

Dudemaaanownsanrx7 is the operator of Wannaspeed. I just picked up the adapter from him. It worked perfectly. At the time it was on the wannaspeed site but you might try PMing him.

I got mine off of Ebay, think I paid $15 bucks for it, just search for triumph air temp sensor, there was about 30 on there when i looked 4 weeks ago. And as far as the harness i just ordered an extra fuel injector clips since i was building a new engine harness anyways.

I'm just looking for female pictail =-) anyone had any luck anywhere?