1987 RX7 Turbo II Banzai Adapter - Idle Issue (Basemap needed)
 

So I just installed the PFC using the Banzai adapter.
A couple questions, I'm having a hard time to get the car to idle, can the PFC not perform the self learn idle with this 3 bar map sensor, provided by Banzai with the kit?
Am I going to have to tow it to a shop to get it tuned? Do we need a full range TPS? I also have a wideband for it but it's not installed yet, maybe that's why?

The car currently has 720CC Denso Injectors all around, Street ported, Stock fuel pump, Turbo 79mm .91 AR

What base map are you using? Did you follow the instructions for the FRT wire?

If you are using the S4 TPS, splice the FRT wire to the 3F wire.

Install the wideband so you know what your AFR's are at.

Have any vacuum leaks? Why do you have a stock fuel pump?

The FRT wire mod is done.
No vacuum leaks, the fuel pump was upgraded(Unsure of brand)

Would you recommend I get a datalogit and a laptop to better tune it? Or can it be tuned with the commander? I'm using my own map. The car idles around 600RPM's even though we set the idle to 800RPM's.

You will need a Datalogit.

You need the datalogit to set up the scale and offset for the map sensor

Ok so I got my hands on a datalogit, what exactly do I set my scale and offset for the 3-bar to function correctly with the car?

6300 offset 0