Need critical mount dimensions - SR, KA, Honda K
 

Yes I know a potential swap like this is stupid and pointless if power/dollar and ease is most important to you.

I'm just a engineering student that wants to do an interesting school project.

That said, I don't have access to a K20/24, SR20, or KA24 at the moment. So if anyone can take down some dimensions, I'd be very grateful and see if I can offer it to this community if they want it.

Dimensions needed:
1. Mount pictures and locations on block relative to each other, relative to the oil pan, relative to the center driveline
2. Same as above for the transmission.

I didn't notice any other places to post (as this is a V-8 Powered thread..). Please excuse that, and thanks! :icon_tup:

I always wished someone would make mounts I could buy for a sr20 swap

Well, nice to know someone replied. I wish I had open access to a friend that has one but friends in my area care more about wishing all cars were EV's

Anyways, if someone has the motor mounts for the SR20 or KA24, or just a block I can make measurements on.... thats all I need to get started with CAD work.

Do you want the GTi-R engine mount points or just RWD SR20 mount points? The GTi-R/AWD engine has unique mounting points. Even though it sits just like the FWD setup, it has mount points in different locations. Found this out the hard way.

I don't have a RWD SR20 handy but I do have FWD and AWD applications at my compound. I could possibly borrow a friend's S15 to get some measurements for you.

I also have plenty access to the RWD KA24 setup.