|
my 2jz rx7
hey
this was my 2009-2010 winter project ive been working on, shes not done yet but i wanted to share and see what u guys thought, im having a small issue when i hit boost, thats why my rpms are all over the place... also, ive spoken to a couple of people on here and everyone is always asking me to post pics and what not......hope you like my hard work and dedication, and please take note, i did this all on my own, from pulling the motor out, to building it piece by piece, to putting in the 2jz, i did it all alone, i dont have friends i can trust and who wont steal from me, i spent countless hours, LATE hours, blood, sweat and tears for fucking car lol and in the end...i did it for me, i hope to it becomes a crowd pleaser.... enjoy http://www.youtube.com/watch?v=uibGtC2F8hE http://www.youtube.com/watch?v=jdt0rQKWIro and here are some pics my old set up http://i255.photobucket.com/albums/h...d/IMG_0072.jpg http://i255.photobucket.com/albums/h...d/IMG_0074.jpg http://i255.photobucket.com/albums/h...d/IMG_0076.jpg out with the old http://i255.photobucket.com/albums/h...d/IMG_0183.jpg http://i255.photobucket.com/albums/h...d/IMG_0185.jpg yea.........no comment http://i255.photobucket.com/albums/h...d/IMG_0238.jpg http://i255.photobucket.com/albums/h...d/IMG_0239.jpg 2jz ( stock form ) http://i255.photobucket.com/albums/h...IMG_0277-1.jpg http://i255.photobucket.com/albums/h...d/IMG_0278.jpg http://i255.photobucket.com/albums/h...d/IMG_0501.jpg mod list: 2jz-gte ( obvious ) new engine harness R154 Transmission 1jz flywheel ACT X015 extreme clutch aluminum driveshaft Greddy PE exhaust rx7store.com midpipe Garret GT35R single turbo supra single turbo DP 4" intercooler w/ 3" piping koyo radiator supra tt Rad. hoses russell oil feed and return line t3 manifold tial BOV and W/G light weight pulleys supra TT FP vertical door kit greddy timing belt evo-r sleek headlight ( 90 mm ) 4x 12k HID ( low and high beam ) custom fabrications ( sub frame, transmission brace ) shifter extension custom wiring ( battery, fuse box, relay box relocation ) Drift motion intake and im sure im missing more stuff but thats the gist of it mobile 1 0w30 redline MT90 preston 50/50 ( green ) coming soon- burnout body kit, custom paint, rims, cams + gears and what ever else comes to mind lol thanks for looking :nod: |
continued pt2....
primer
http://i255.photobucket.com/albums/h...d/IMG_1364.jpg http://i255.photobucket.com/albums/h...d/IMG_1365.jpg http://i255.photobucket.com/albums/h...d/IMG_1367.jpg http://i255.photobucket.com/albums/h...d/IMG_1366.jpg http://i255.photobucket.com/albums/h...7/IMG_2445.jpg http://i255.photobucket.com/albums/h...7/IMG_2444.jpg http://i255.photobucket.com/albums/h...7/IMG_2417.jpg http://i255.photobucket.com/albums/h...7/IMG_2412.jpg http://i255.photobucket.com/albums/h...7/IMG_2411.jpg http://i255.photobucket.com/albums/h...7/IMG_2410.jpg |
continued pt3....
my gf hahah
http://i255.photobucket.com/albums/h...7/IMG_2403.png http://i255.photobucket.com/albums/h...7/IMG_2400.jpg http://i255.photobucket.com/albums/h...7/IMG_2379.jpg http://i255.photobucket.com/albums/h...513_451112.jpg me http://i255.photobucket.com/albums/h...7/IMG_0333.jpg no more wires in the engine bay ;-) http://i255.photobucket.com/albums/h...7/IMG_1526.jpg http://i255.photobucket.com/albums/h...7/IMG_1527.jpg |
damn. Nice work man you make me want to get off my ass and paint my car. Thanks
|
What subframe are you using? Are you running a bumpsteer correction kit? It's not a conversion I particularly enjoy, but it looks good and built not bought is always awesome. Hope you get your boost straight. It'll be some kind of monster when it's all sorted out.
Thumbs up, Barban. |
I do like the sound of a 2JZ.....Nice work dude, engine bay looks awesome :icon_tup:
|
Looks like the tech2 kit and the tech2 intercooler kit also.
Very nice build...doing it all yourself is always the best way, I wouldn't have it any other way :) |
Cool spot to put the fuse boxes, i havnt seen anyone move them there yet. The vertical doors are horrible, but it looks like a lot of hard work went into the car. Congrats on getting it running, gl working out the issues.
-Austin |
Originally Posted by 7passu
(Post 10098872)
Looks like the tech2 kit and the tech2 intercooler kit also.
Very nice build...doing it all yourself is always the best way, I wouldn't have it any other way :) yea its tech2, but i wouldnt recommend ANYONE to buy from them, hence y i didnt mention them at all, very stressful and they sell crap-o-la for big $$....hence my "tech2 intercooler kit" which actually is from CXRacing:( |
Originally Posted by Toyotarx7
(Post 10100074)
yea its tech2, but i wouldnt recommend ANYONE to buy from them, hence y i didnt mention them at all, very stressful and they sell crap-o-la for big $$....hence my "tech2 intercooler kit" which actually is from CXRacing:(
I also got my kit from Tech2. I will never buy from them again. Their customer service is a joke. Also CX racing intercooler kit :nod: Here is my shit. Sorry for the crappy phone video. I have made alot more progress since the video. http://www.youtube.com/watch?v=Hl3OkjHfgmQ |
yea man tech2 is TERRIBLE, i ordered parts from them and took them over 3 months to get me my radiator kit ( which came incomplete when i got it too ) i could go into alot how shitty their service and parts are lol
and ur swap is clean bro!!! where in jersey are u located? i would love to see ur set up in person! did u have any issues during the swap? what hood are u running? |
i would love this thing! amazing homie
|
Originally Posted by Toyotarx7
(Post 10100588)
yea man tech2 is TERRIBLE, i ordered parts from them and took them over 3 months to get me my radiator kit ( which came incomplete when i got it too ) i could go into alot how shitty their service and parts are lol
and ur swap is clean bro!!! where in jersey are u located? i would love to see ur set up in person! did u have any issues during the swap? what hood are u running? I had some issues. The kit went in pretty good. The wiring was a little pain in the ass, but thats because I had to call Tech2 20,000 times to send me wiring schematics. I am gonna try and use the stock hood. I have it all cut up already. I just have to make the hood scoop for it. I am just trying no to make it look muscle though. |
i had sean do my harness, he worked for tech2 but they fired him over some bullshit, he did a great job!!! nd hey man if u ever need help with it let me know, we're in the same boat lol are u taking the car out any time soon? i have to do the body on mine before i can put plates on her
btw, would u be interested in a diff. brace? i have one im not using any more, maybe you could u put it to come use, its from the rx7store.net let me know if ur interested :-) |
Originally Posted by Toyotarx7
(Post 10101702)
i had sean do my harness, he worked for tech2 but they fired him over some bullshit, he did a great job!!! nd hey man if u ever need help with it let me know, we're in the same boat lol are u taking the car out any time soon? i have to do the body on mine before i can put plates on her
btw, would u be interested in a diff. brace? i have one im not using any more, maybe you could u put it to come use, its from the rx7store.net let me know if ur interested :-) I have to get my car completely aligned, since I swapped everything from another chassis. I drove it on my driveway for a bit. It feels nice. I might have to get a bushing kit later on. Right now I have buy a Tig welder to finish the hood. I am also slowly gathering stock interior parts that I am missing. I also need to do the body. Paint is shot. I need to get both rear wheel wells fixed. The dude I bought the shell from decided to put wide flares on and cut some of the wheel well arc :icon_no2:. Did you get your tach working? I got mine working but its not that accurate and responsive. I might need a diff brace but not right now. |
nah im not using the stock cluster, im going with all defi gauges in the dash, im sloooooowly buying one by one since they are so freaking expensive!! and like i said man, if u need help with it let me know!
and if u want the brace i'll send u pics if u want and give u good deal for it. just let me know im tony BTW |
Great build man!
& yes, those Defi gauges will get ya... I spent $680 on my 3.... ouchh! But I think that was with a Tri-point pod too.... still pricey though. www.thmotorsports.com was the cheapest I could find them. Great service too. GLWB |
thanks for the tip!!!
|
update: the vertical doors are off and i the stock fenders are back one ( for now ) and here are some pics :-)
http://i255.photobucket.com/albums/h...7/IMG_2484.jpg http://i255.photobucket.com/albums/h...7/IMG_2482.jpg http://i255.photobucket.com/albums/h...7/IMG_2478.jpg http://i255.photobucket.com/albums/h...7/IMG_2480.jpg http://i255.photobucket.com/albums/h...7/IMG_2471.jpg http://i255.photobucket.com/albums/h...7/IMG_2469.jpg can u see my wire tuck job :-) http://i255.photobucket.com/albums/h...7/IMG_2474.jpg http://i255.photobucket.com/albums/h...7/IMG_2473.jpg |
first very nice job on the swap im going through the same swap on my fd at the moment what subframe did you go with tech 2 or other, also your downpipe was it hard fit or custom bought and lastly your harness was this done by you or tech2. i ask cause i notice alot of tech 2 makings like the raidiator setup was wondering about the rest very nice keep up the great work mahalo...
oh and the shifter im using the same trans setup from tech 2 i was wondering if that is the height for the shifter or did you make it taller somehow and what hood are you going with for the setup thanks again... Tank |
you sir have PM!!!! please help, btw your car is sick!
|
what did u do to the break lines?
|
i powder coated them silver
|
sexyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
nice meeting you, we should get together sometime |
| All times are GMT -5. The time now is 02:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands