Alternate auto tranny Choices for the FD?
I simply cannot swap out my auto tranny for a 5 speed. I am going to keep my rotary engine and was curious as to weather some of you have heard of auto tranny swapping. An auto that can handle 400+whp and can potentially be bolted up to the 13b..........
|
|
Turbo 350 would do you good... no OD though... You can build a 700r4 to handle that power nowadays and pretty inexpensively.
http://www.monstertrans.com/store/pr...mance-2WD.html |
work the s3 ( 3n71b ) or s4 ( 4n71b ) jatco,, it is already a c4 variant and can be readily worked much stronger
in aus they run single digit timeslips in VL commies ( chevs with nissan rb30 turbo engines ) http://www.keas.com.au/ this mob in oz have a huge rep ,, dunno who does same in US note they ship components,, so maybe someone local to you can do the work if you pass on the contact JATCO 3N71B inc Rotary (R3A) Up to 500hp modified to suit various engine combinations Components to suit rebuilders Full manual forward pattern valve bodies Engine braking in ALL gears Transbrake forward pattern valve bodies Engine braking in ALL gears VASCO Plus input shafts Billet intermediate servo/piston sets Cast alloy pans Shift kits JATCO 4N71B inc Rotary Up to 450hp modified to suit various engine combinations Components to suit rebuilders Full manual forward pattern valve bodies Engine braking in ALL gears Transbrake forward pattern valve bodies Engine braking in ALL gears VASCO Plus input & intermediate shafts sets Billet intermediate servo/piston sets Billet over-drive servo/piston sets Cast alloy pans Shift kits note they may also do the RE4R01A-3A ( FD type box ) to 700 HP, enquire for details JATCO RE4R03A inc AWD Skyline Full manual forward pattern valve bodies With either electric 4th gear (P-R-N-3/4-2-1) or manual 4th gear (P-R-N-4-3-2-1) Engine Braking in ALL Gears Lock Up Torque Converter Available Transbrake forward pattern valve bodies With either electric 4th gear (P-R-N-3/4-2-1) or manual 4th gear (P-R-N-4-3-2-1) Engine Braking in ALL Gears Billet intermediate servo/piston sets Conversion output shafts - RE4R03A to AWD transfer case |
Originally Posted by Japan2LA
(Post 10737468)
Yes
Powerglide: http://www.fbperformance.com/viewtra...nsmissionID=67 TH350: http://www.fbperformance.com/viewtra...nsmissionID=65 Great links. Im looking for a trans that can and will be used on the street so O/D and reverse is a must.........any ideas? |
IIRC, phase one Subaru transmissions bolt right up to a 13B. There is a phase 2 4EAT that people hold quite a bit of power with just a TC. Maybe you can find a phase 1 to phase 2 bell housing?
|
All times are GMT -5. The time now is 08:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands