Video Blog - 1974 1976 Mazda RX3 Restoration
#1
Video Blog - 1974 1976 Mazda RX3 Restoration
Konnichiwa fellow rotary enthusiasts. While I did make an earlier introduction here on rx7club.com https://www.rx7club.com/old-school-other-rotary-63/restomod-rx3-989511/ I am starting a new thread for the video blog and photo shoots of my project.
Some interesting history about my two cars on this opening video. Some of you may have seen the 1st vid I posted of just the 1976 RX3. This 1st installment below actually includes about 1.5 minutes of that shoot pared down a bit. The version on YouTube is HighDef 1080P for those of you who appreciate resolution.
I try to keep things interesting so check back for more videos and photos as I get the work done
Cheers Mates!!
http://youtu.be/0XO43m2jsgo
Some interesting history about my two cars on this opening video. Some of you may have seen the 1st vid I posted of just the 1976 RX3. This 1st installment below actually includes about 1.5 minutes of that shoot pared down a bit. The version on YouTube is HighDef 1080P for those of you who appreciate resolution.
I try to keep things interesting so check back for more videos and photos as I get the work done
Cheers Mates!!
http://youtu.be/0XO43m2jsgo
Last edited by riverseine; 04-25-12 at 10:18 PM.
#3
6 speed in an rx3
iTrader: (40)
AWESOME!!! keep it up and get that thing back on the road!!! If you need anything give me a shout... I have a few spares hidden away... good luck on the restoration. Stick with it and you will get it done... Mine looked like yours not too long ago
#5
Senior Member
It's pretty cool that you still have your first RX3, that shift *** is pretty cool, is that a dealer add on or were they all like that? when you're done with the silver one you should make the Green one into a drag car if you're into drag racing
#7
As far as turning the green one into a drag racer goes, I'll leave that to someone with that passion.
Trending Topics
#8
That video I posted (at top) is way too boring. Sorry guys. This one ROCKS! (and is way shorter) ...
Seriously though, I've got the silver car mostly stripped and almost ready to deliver to the body shop. Just gotta remove the glass and conquer a couple stubborn screws holding the metal flashing that goes between the crash pad and the windshield.
A HUGE thanks goes to tom0261 who has helped me wrench over the last couple sessions. Tom provides elbow grease, wisdom, & experience that is greatly appreciated.
Ozzyincali has also been golden in sourcing knowledge and tool loaning. He's great people if I ever knew one
And the project continues...
Seriously though, I've got the silver car mostly stripped and almost ready to deliver to the body shop. Just gotta remove the glass and conquer a couple stubborn screws holding the metal flashing that goes between the crash pad and the windshield.
A HUGE thanks goes to tom0261 who has helped me wrench over the last couple sessions. Tom provides elbow grease, wisdom, & experience that is greatly appreciated.
Ozzyincali has also been golden in sourcing knowledge and tool loaning. He's great people if I ever knew one
And the project continues...
#11
Nice project mate, keep those vids coming. You might find when removing the front guards (or fenders as you guys call 'em) the bolts holding the lower section to the underside of the body, are prone to snapping like that relay bolt did, the little bastard!
The rear 1/4 panel rust didn't look too bad, mine was much worse than that. Oh, be carefull taking the stainless trim strip off the nosecone too, they're expensive.
Good luck with the progress.
Keith
The rear 1/4 panel rust didn't look too bad, mine was much worse than that. Oh, be carefull taking the stainless trim strip off the nosecone too, they're expensive.
Good luck with the progress.
Keith
#15
Oh nice, good stuff, I timed it well. Yep, I've snapped a few of those bolts over the years. I see you've got the front windscreen out too but not the back one, did the front come out OK? The front screens you can buy from anywhere that sell car windows (over here anyway) but the back will take a bit of looking for if it happened to brake on you. I used a device called a "pull knife" on mine, 5-10 minutes work and it came out very easy with no damge whatsoever.
Actually, "gypsy" on ausrotary.com (not sure if you're a member there or not) is supposed to be getting a limited run of rear screens made if you end up needing one, not real cheap though.
That plate behind the back seat is interesting too, I don't think we got them in the Aussie spec cars.
So what's the plans for it, colour, engine-drive line etc. keeping it original or going for some upgrades?
Oh, and keep those vids coming too!! Longer is better!
Keith
Actually, "gypsy" on ausrotary.com (not sure if you're a member there or not) is supposed to be getting a limited run of rear screens made if you end up needing one, not real cheap though.
That plate behind the back seat is interesting too, I don't think we got them in the Aussie spec cars.
So what's the plans for it, colour, engine-drive line etc. keeping it original or going for some upgrades?
Oh, and keep those vids coming too!! Longer is better!
Keith
Last edited by keithrx3c; 08-24-12 at 12:48 AM.
#16
...I see you've got the front windscreen out too but not the back one, did the front come out OK? The front screens you can buy from anywhere that sell car windows (over here anyway) but the back will take a bit of looking for if it happened to brake on you. I used a device called a "pull knife" on mine, 5-10 minutes work and it came out very easy with no damge whatsoever.
..."gypsy" on ausrotary.com ... is supposed to be getting a limited run of rear screens made if you end up needing one.
..."gypsy" on ausrotary.com ... is supposed to be getting a limited run of rear screens made if you end up needing one.
Haven't touched the rear glass yet. I'm probably going to search for someone that knows how before ruining the rear. I'll check out ausrotary.com and look for gypsy - see what he's got up his sleeve.
So far I'm thinking stock 12A NA. I've got 82 GS and 84 GSL engines lying around. 82 is blown, the 84 supposedly runs - got it cheap - even if it won't start I've got parts.
Been traveling a lot lately so haven't done much. I've got another VLog coming in a few minutes
#18
Yea definitely check out John's (gypsy) RX-3 build thread in members rides, assuming you're a member on AR and you've got a spare 8 hours to read it all.
I was unsure of how to get my back window without damaging it, so I asked in the tech section and was told about the pull knife, best 22 bucks I ever spent.
Keith
I was unsure of how to get my back window without damaging it, so I asked in the tech section and was told about the pull knife, best 22 bucks I ever spent.
Keith
#19
Ok, after watching the vid, the front guards from Phils, are they the new ones you're getting or good used ones? The first of his new guards weren't very good, someone on AR (possibly jypsy) bought a pair and they were shaped wrong, maybe they've improved since then though.
Regarding the bumper bar spacer section on the nose cone that you took off, I was always curious about them, I thought they might've been spot welded on.
With your crash pad, you could probably get it reskinned to original specs again rather than getting one custom made. Most people here get them reskinned.
Keith
Regarding the bumper bar spacer section on the nose cone that you took off, I was always curious about them, I thought they might've been spot welded on.
With your crash pad, you could probably get it reskinned to original specs again rather than getting one custom made. Most people here get them reskinned.
Keith
Last edited by keithrx3c; 09-11-12 at 02:22 AM.
#24
Ok, after watching the vid, the front guards from Phils, are they the new ones you're getting or good used ones? The first of his new guards weren't very good, someone on AR (possibly jypsy) bought a pair and they were shaped wrong, maybe they've improved since then though.
...
Keith
...
Keith
He says the fenders from Phil's Rotary were very difficult to install. It required much tweaking and enlarging of a couple bolt holes.
Also, my body guy was successful at removing the rear glass without cracking or breaking it. I am SO grateful for that. Of course, now that the rear glass is finally out without damage I find a source for brand new screens (front & rear) at a reasonable price.
As for the screws under the center dash tin piece between the firewall and the crash pad...he got those out too. No idea how. God bless him.
#25
I suppose sometimes it's better to leave things to the experts. Great to hear he got it out damage free though!
Someone on AR was saying the Phil's guards are being fixed up so they actually fit properly, must've had a lot of complaints about em. I hear they'll be doing all panels soon too, bootlids, bonnets, doors, rear quarters, beaver panels, the lot.
Keith
Someone on AR was saying the Phil's guards are being fixed up so they actually fit properly, must've had a lot of complaints about em. I hear they'll be doing all panels soon too, bootlids, bonnets, doors, rear quarters, beaver panels, the lot.
Keith