Old school 13B deceleration control valve
 

So I'm having some trouble with the deceleration control valve on my Rx-4. I'm either looking for a good condition nos or used valve or any leads on a place that can rebuild them. Any help is appreciated.

Anyone? Anything?

post up a picture of what your looking for... I will see if i have it

https://cimg7.ibsrv.net/gimg/www.rx7...ab1bc7c19e.jpg
https://cimg9.ibsrv.net/gimg/www.rx7...008f9d162f.jpg
https://cimg4.ibsrv.net/gimg/www.rx7...e77abd3b84.jpg
https://cimg6.ibsrv.net/gimg/www.rx7...a4d4aae605.jpg
That's what it looks like. Its mounted on top of the engine.

find your part.?
 

Did you get 1 I have lots..

I did get one that looked really good but was worse than my original when I tried it. Thats the problem with these. They can look good but are all in the same condition on the inside. My original one works fine other than in high humidity. Then it tends to stick and act up.

I have a bunch from my truck, and spares...
 

I use Tri-flo oil in there and cycle them, trying to coat and polish the varnish a bit...there from San Jose area now in storage in Vegas, been boxed forever....