Move Shifter on TII Trans
I am putting a TII engine and trans in my B2200 soon, and I am wondering if there is a way to move the shifter forward about 6" so that it lines up with the B2200 shifter hole, and is not behind the seat of the truck. I have a NA 13B in there now, using the NA trans, and I just replaced the tailshaft with the one from my B2200 trans to make it work. I can do the same if I can locate a 2WD B2600, but they are not common, and paying for a complete trans and shipping it would be expensive, so if I cant find one locally before I do the swap, I want to make sure the stock shifter can be modded.
|
Look at post 273 on this thread. It describes putting a TII trans in to a FB but you get an idea of what is required.
https://www.rx7club.com/build-thread...078141/page11/ |
If you still need this, at the least for posterity sake
The first post in this video gets you a smidgen over 4" and requires no welding https://www.rx7club.com/old-school-o...video-1011511/ If you can weld you can get pretty much any length you want. I moved mine ~10" |
All times are GMT -5. The time now is 09:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands